We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR4 RDIMM module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 ECC RDIMM Gigabyte MZ01-CE0 EPYC memory upgrade

SKU CH-XZT3-WMFJV

16 GB DDR4 3200 ECC registered RDIMM for Gigabyte MZ01-CE0 EPYC servers

  • Total capacity16 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL22
  • Buffer typeRegistered
  • Rated voltage1.2 V
  • 16 GB DDR4 3200 ECC RDIMM boosts server capacity
  • CL22 latency at 1.2 V keeps power draw low
  • 2Rx8 registered design fits Gigabyte MZ01-CE0 EPYC boards
  • Samsung Micron Hynix chips tested under load for stability
  • 288-pin module installs in minutes without special tools

16GB DDR4 3200 ECC RDIMM for Gigabyte EPYC boards

This 16GB DDR4 3200 module is built as a registered ECC RDIMM for Gigabyte MZ01-CE0 motherboards running AMD EPYC processors. It operates at 1.2V with CL22 latency and uses a 2Rx8 organisation across 288 pins. The module is validated for server workloads that require error correction and registered signalling.

Server admins needing single-module ECC capacity

The single 16GB stick suits administrators who want to add one registered ECC module to a compatible Gigabyte EPYC platform. Builders who need unbuffered UDIMMs, non-ECC memory, higher frequencies or lower latencies should look elsewhere.

Check motherboard slot population rules

Verify that the MZ01-CE0 accepts a 2Rx8 registered DIMM in the target slot and that the BIOS revision supports DDR4 3200 at 1.2V. Confirm the channel population order required by the EPYC CPU before installing the 288-pin module.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $114.99
Cheaper than about 66% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $7.19 per GB
Cheaper than about 56% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineGigabyte Server Motherboard Compatible Series Memory
Model nameGigabyte DDR4 3200 MHz ECC RDIMM Registered Server Memory
Part numberMR25600-628K1
Total capacity16 GB
Product type288-Pin DDR4 RDIMM
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL22
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.2 V
Compatibility
Compatible systemsGigabyte
In the box
Included items16 GB (1 × 16 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Does the Gigabyte MZ01-CE0 motherboard require registered ECC memory for this module to function?

Yes, the board is an AMD EPYC server platform that only accepts registered ECC RDIMMs, and this module matches that requirement exactly.

Can I mix this 3200 MT/s CL22 stick with slower DDR4 RDIMMs already installed in the server?

The memory controller will downclock all modules to the speed of the slowest installed DIMM, so mixing is possible but overall bandwidth will drop.

How can I verify the module is running at 3200 MT/s with ECC active after installation?

Check the BIOS memory information screen or run a tool such as dmidecode; it should report 3200 MT/s, CL22 timings and ECC enabled for the DIMM.

More in Model-Specific Memory Upgrades

Similar items