Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4-3200 ECC registered DIMM, CL22 1.2 V, 2Rx8 for Supermicro EPYC servers
This 16 GB DDR4 3200 registered module is built for Supermicro H12SSW-iN motherboards running AMD EPYC processors. It delivers error-correcting code protection and registered signalling for stable operation in mission-critical server and workstation environments.
Running at 1.20 V with CL22 latency, the dual-rank 2Rx8 design draws minimal power while maintaining data integrity under sustained loads. The absence of a heat spreader keeps the profile slim for dense chassis airflow without adding acoustic noise.
Upgrading from standard unbuffered memory or lower-speed registered kits adds hardware error correction and 3200 MT/s throughput for virtualization and database workloads. The jump is worthwhile when uptime and data accuracy outweigh raw capacity expansion.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | SuperMicro Server/Workstation Compatible Series Memory |
| Model name | SuperMicro DDR4 3200 MHz ECC RDIMM Registered Server Memory |
| Part number | MR25600-628K1 |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 RDIMM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL22 |
| ECC support | Yes |
| Buffer type | Registered |
| Heat spreader | No |
| Memory rank | 2Rx8 |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Supermicro |
| In the box | |
| Included items | 16 GB (1 × 16 GB) DDR4 3200 MHz PC4-25600 2Rx8 1.2 V CL22 288-PIN ECC RDIMM Registered Server Memory |
Align the module notch with the slot key, press straight down until both retention clips click, and verify the board detects the full 16 GB at 3200 MT/s; the common mistake is stopping before the clips lock, leaving the module partially seated.
No routine maintenance is required; if a correctable error count rises or the module fails stress testing, replace the single 16 GB stick — there are no user-serviceable parts on the board.
The CAS latency of 22 cycles at 3200 MT/s sets the timing floor; under continuous throughput the memory controller will hit that latency bound before voltage or thermal limits become a factor.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?