We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 memory module with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 1.1V 288-pin ECC RDIMM memory upgrade

SKU CH-DJG1-5MGQ5

16GB DDR5 4800 ECC registered RDIMM for Thinkmate servers with CL40 latency and 1.1V operation

  • Total capacity16 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • 16 GB DDR5 4800 MHz adds responsive capacity to Thinkmate servers
  • ECC registered design protects data integrity in mission-critical workloads
  • CL40 latency at 1.1 V balances speed with efficient power draw
  • 1Rx8 single-rank layout simplifies memory-channel population rules
  • 288-pin RDIMM form factor fits Thinkmate STX-NL-QE16 E4 nearline storage server

System-Specific DDR5 RDIMM for Thinkmate Servers

This NEMIX RAM module delivers 16GB of DDR5 4800 registered ECC memory in a single 288-pin RDIMM. It operates at 1.1V with CL40 latency and a 1Rx8 rank configuration. The part is built for the Thinkmate STX-NL-QE16 E4 nearline storage server.

Suited for Thinkmate STX-NL-QE16 E4 capacity

IT administrators expanding memory in this specific Thinkmate platform will find direct compatibility. Buyers needing non-ECC unbuffered DIMMs for consumer desktops or laptops cannot use this registered server module. Systems requiring different pin counts, voltages or DDR generations are also incompatible.

Registered ECC with 1Rx8 organisation

The single-rank-by-eight architecture determines how the memory controller addresses the module and affects maximum population rules for the target server. Verify the platform's qualified vendor list for this exact organisation before purchasing.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $435.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $27.25 per GB
Pricier than about 76% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineTHINKMATE Server/Workstation Compatible Series Memory
Model nameTHINKMATE DDR5 4800 MHz ECC RDIMM Registered Server Memory
Part numberMR38400-618K1
Total capacity16 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsTHINKMATE
In the box
Included items16 GB (1 × 16 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

Does the 1.1V operating voltage help limit heat output when the server runs continuously?

The module runs at 1.1V, which is the standard DDR5 voltage, so power draw and heat stay at the level expected for a 4800 MT/s registered DIMM under sustained load.

What motherboard slot and chipset support are required to install this 288-pin registered ECC module?

You need a server or workstation motherboard with DDR5 RDIMM slots that accept 1Rx8 registered ECC modules; the board's memory controller must support 4800 MT/s operation and ECC functionality.

Can this 16GB 1Rx8 stick be mixed with other DDR5 registered ECC modules of different capacities in the same system?

Mixing is possible if every module is DDR5 registered ECC and the motherboard's memory controller supports the combined population rules; all sticks will run at the lowest common speed and latency.

More in Model-Specific Memory Upgrades

Similar items