We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board DDR5 memory module with gold contacts and black chips

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 ECC RDIMM CL40 1Rx8 Dell Precision 7960 memory upgrade

SKU CH-G2VB-7XF3S

16 GB DDR5 ECC registered DIMM running at 4800 MT/s with CL40 latency for the Dell Precision 7960 workstation

  • Total capacity16 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • ECC protection prevents data corruption with registered DDR5 4800 technology
  • 16 GB capacity expands Dell Precision 7960 workstation memory headroom
  • CL40 latency at 1.10 V delivers stable server-grade performance
  • 288-pin RDIMM form factor fits Precision 7960 rack and tower models
  • Samsung Micron Hynix chipsets ensure enterprise-grade reliability and compatibility

Dell Precision 7960 DDR5 ECC RDIMM

This 16 GB DDR5 module is built for the Dell Precision 7960 rack or tower workstation. It delivers registered ECC memory for systems that require error correction and signal buffering. The single-rank 1Rx8 layout fits one 288-pin slot. Buyers needing non-ECC or unbuffered memory for consumer boards cannot use this part.

Thermals and power in daily operation

Operating at 1.1 V, the module runs at standard DDR5 voltage without a heat spreader. Registered buffering reduces electrical load on the memory controller during sustained workloads. No active cooling is included, so airflow in the workstation chassis handles dissipation. Systems without adequate case ventilation may see higher temperatures under continuous load.

CL40 latency at 4800 MT/s

The memory runs at 4800 MT/s with a CAS latency of CL40. This timing is the key figure that determines whether the module matches the workstation's qualified memory list. If the platform requires a different latency or speed grade, this kit will not be compatible.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $465.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $29.12 per GB
Pricier than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineDell Server/Workstation Compatible Series Memory
Model nameDell DDR5 4800 MHz ECC RDIMM Registered Server Memory
Part numberMR38400-618K1
Total capacity16 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsDell
In the box
Included items16 GB (1 × 16 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 288-PIN ECC RDIMM Registered Server Memory

Questions about this item

How do I install the 288-pin DDR5 RDIMM in the Dell Precision 7960 and what step is often missed?

Power off the workstation, open the chassis, align the module key with the slot notch, press firmly until both retention clips click, then enter the BIOS to verify the 4800 MT/s speed and ECC status are recognised.

What maintenance or replacement will the 16 GB ECC RDIMM need over its service life?

No scheduled maintenance is required; the module has no heat spreader or moving parts. Replace it only if memory diagnostics report uncorrectable errors or if you expand capacity beyond the current 16 GB.

What limit appears first when the registered DIMM runs sustained workloads at 1.1 V?

The CL40 CAS latency and 4800 MT/s data rate set the throughput ceiling; sustained use will hit this bandwidth limit before the 1.1 V voltage or registered buffer becomes a constraint.

More in Model-Specific Memory Upgrades

Similar items