We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, 288-pin DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 16GB DDR5 5200 CL38 1Rx8 UDIMM memory upgrade

SKU CH-BYHT-7S98W

A 16 GB DDR5 UDIMM running at 5200 MT/s with CL38 latency and 1.1 V operation

  • Total capacity16 GB
  • Rated speedDDR5 5200 (PC5 41600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL38
  • Buffer typeUnbuffered
  • Rated voltage1.1 V
  • 16 GB DDR5 5200 memory boosts system responsiveness
  • CL38 latency keeps data access tight for everyday workloads
  • 1 V operation reduces power draw and heat output
  • Single-rank 1Rx8 layout simplifies motherboard compatibility
  • 288-pin UDIMM form factor fits standard desktop slots

16 GB DDR5 5200 UDIMM

This 16 GB DDR5 module runs at 5200 MT/s with a CAS latency of 38. It uses a 1Rx8 unbuffered layout on a standard 288-pin UDIMM form factor and operates at 1.10 V. The kit is built for desktop systems that accept DDR5 non-ECC memory.

Suits single-slot upgrades on DDR5 boards

Builders who need a single 16 GB stick to fill one slot or to start a new DDR5 platform will find this module compatible with the listed Kingston reference. Systems requiring ECC, registered DIMMs, or higher-density ranks should look at a different specification.

Fits standard DDR5 desktop motherboards

The 288-pin UDIMM plugs directly into any desktop board with a DDR5 slot that supports non-ECC unbuffered memory at 1.10 V. Using one module leaves remaining slots free for future expansion, while the low 1.10 V operation keeps power draw modest for the memory subsystem.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $233.99
Cheaper than about 57% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $14.62 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineKingston Desktop PC Compatible Series Memory
Model nameKingston DDR5 5200 MHz ECC Unbuffered UDIMM
Part numberMD41600-618K1
Total capacity16 GB
Product type288-PIN DDR5 UDIMM
Performance
Rated speedDDR5 5200 (PC5 41600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL38
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank1Rx8
Power
Rated voltage1.1 V
Compatibility
Compatible systemsKingston
In the box
Included items16 GB (1 × 16 GB) DDR5 5200 MHz PC5-41600 1Rx8 1.1 V CL44 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Does this DDR5 5200 UDIMM require a motherboard with a DDR5 288-pin slot?

Yes, the module uses the DDR5 288-pin UDIMM form factor and needs a compatible DDR5 motherboard slot to function.

Will this CL38 1.10V stick run at its rated speed next to a slower DDR5 module?

The system will typically clock all installed DDR5 memory down to the speed of the slowest module present.

How can I verify the 16GB stick is running at 5200 MT/s after installation?

Check the memory speed in the BIOS or use a system information tool like CPU-Z to confirm the operating frequency.

More in Model-Specific Memory Upgrades

Similar items