We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM Supermicro X14SAE memory upgrade

SKU CH-NKDJ-61SJJ

A 16 GB DDR5 5600 MHz UDIMM with CL46 latency, 1.1 V operation and 288 pins, built from major OEM chips and verified for the Supermicro X14SAE motherboard

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB

  • Exact DDR5-5600 spec match ensures full-speed operation
  • 16 GB capacity adds responsive multitasking headroom
  • Major OEM DRAM chips deliver tested stability
  • 1 V low voltage reduces system power draw
  • 288-pin UDIMM form factor fits Supermicro X14SAE

Exact-match DDR5 upgrade for Supermicro X14SAE

This 16 GB DDR5-5600 module is built to the precise rank, voltage and timing the X14SAE memory controller expects. It installs as a single 288-pin UDIMM and runs at the rated 5600 MT/s speed without manual tuning.

Check your manual for population rules

Desktop and motherboard memory support varies by model, so verify the approved DIMM population order and maximum supported capacity before ordering. The board requires unbuffered non-ECC UDIMMs; ECC or registered modules will not work.

Module uses major OEM chips

Samsung, Micron or Hynix ICs are tested for stability at CL46 and 1.10 V. The package contains only the memory module itself; no heat spreader, cables or software are included.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $225.99
Cheaper than about 57% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $14.12 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the module come with a heat spreader, or do I need to buy cooling separately?

The UDIMM has no heat spreader; it relies on case airflow. No extra cooling parts are included or required for the rated 1.10 V operation.

Should I pick the 16 GB CL46 kit or a different capacity for the Supermicro X14SAE?

The 16 GB CL46 1Rx8 module matches the board's DDR5-5600 spec. Consult the manual for maximum total capacity and approved DIMM population order before adding more sticks.

Will the memory run at 5600 MHz immediately after installing it in the X14SAE?

Yes, the module is spec-matched to DDR5-5600 PC5-44800 at CL46 1.10 V, so the motherboard should recognise it at full rated speed without manual tuning.

More in Model-Specific Memory Upgrades

Similar items