We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V 288-Pin UDIMM Supermicro X13SAE-F memory upgrade

SKU CH-B0H6-PN6H0

A 16 GB DDR5 5600 MHz CL46 UDIMM built for the Supermicro X13SAE-F motherboard

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB

  • Exact-match 16 GB DDR5-5600 CL46 1Rx8 1.1 V for full rated speed
  • Verified fit for Supermicro X13SAE-F 288-pin UDIMM slot
  • Major OEM Samsung Micron Hynix chips tested at rated specs
  • Check manual for supported capacity and DIMM population order
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR5 upgrade for Supermicro X13SAE-F

This 16 GB DDR5 5600 module delivers the precise 1Rx8 Non-ECC unbuffered specification the board expects. It installs as a single 288-pin UDIMM at 1.1 V with CL46 timing. Builders expanding a compatible Supermicro desktop platform will have the new capacity recognised immediately at the rated 5600 MT/s speed.

Replaces slower or lower-capacity DDR5 UDIMMs

The jump is worthwhile when the current memory runs below 5600 MT/s or when the system has fewer than 16 GB installed. Matching the exact rank, voltage and timing avoids down-clocking or population errors that mixed modules can cause. Buyers who need ECC registered DIMMs, SODIMM form factors or capacities beyond 16 GB per slot should look elsewhere.

Simple UDIMM installation with standard precautions

Align the notch on the 288-pin module with the slot key, press firmly until the retention clips click, and verify the new capacity in BIOS. Common issues include seating the module incompletely, populating slots in the wrong order per the motherboard manual, or mixing ranks that the board does not support. The kit contains a single DIMM; no heat spreader is included.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $208.99
Cheaper than about 58% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $13.06 per GB
Pricier than about 59% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 288-pin DDR5 UDIMM fit the Supermicro X13SAE-F motherboard slots?

Yes, the module uses the exact 288-pin UDIMM form factor required by the X13SAE-F, so it seats directly in the board's DDR5 slots.

What is the correct installation step for this 1Rx8 module on the X13SAE-F?

Insert the stick into the primary slot indicated in the motherboard manual, press down until both retention clips click, and verify the system posts at 5600 MHz.

Does the lack of a heat spreader mean the 1.1V modules will need active cooling later?

No, DDR5 at 1.1 V and CL46 runs within standard thermal limits; the board's normal airflow is sufficient for the life of the memory.

More in Model-Specific Memory Upgrades

Similar items