We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 4800MHz PC5-38400 CL40 1Rx8 1.1V 288-Pin UDIMM memory upgrade for Supermicro X14SAE

SKU CH-GG5V-2HSVN

16 GB DDR5 4800 MHz CL40 UDIMM built for the Supermicro X14SAE motherboard

  • Total capacity16 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB

  • 16 GB DDR5 4800 MHz capacity for responsive multitasking
  • CL40 latency at 1.1 V for stable rated-speed operation
  • 1Rx8 single-rank unbuffered layout matches controller expectations
  • Built with Samsung Micron Hynix OEM chips for tested reliability
  • 288-pin UDIMM form factor fits Supermicro X14SAE motherboard

Exact-match DDR5 upgrade for Supermicro X14SAE

This 16 GB DDR5-4800 module is built to the precise rank, voltage and timing the Supermicro X14SAE memory controller expects. It installs as a 288-pin UDIMM and is recognised at full capacity and rated speed without manual tuning.

16 GB single-rank capacity and PC5-38400 bandwidth

The 1Rx8 organisation delivers 16 GB in one slot, leaving three additional DIMM slots free for future expansion on the X14SAE. Bandwidth tops out at the JEDEC-standard 38400 MT/s, so workloads that exceed this throughput will need faster modules or additional channels.

Low-voltage operation with no heat spreader

Rated at 1.1 V, the module draws minimal power and runs cool enough to operate without a heat spreader in typical chassis airflow. The unbuffered design adds negligible latency, and the absence of ECC keeps the data path simple for desktop workloads.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $202.99
Cheaper than about 58% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $12.69 per GB
Pricier than about 58% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD38400-618K1
Total capacity16 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will this 16GB DDR5 4800MHz module work in the same Supermicro X14SAE board alongside my existing DDR5 memory?

The module is spec-matched to the X14SAE with 288-pin UDIMM form factor, 1.1V operation, CL40 timing and 1Rx8 rank, so it will be recognised at full capacity and run at its rated 4800MHz speed when installed per the board's population rules.

How can I verify the module is running at 4800MHz with CL40 after installation?

Check the memory speed and latency in BIOS or a system-information tool; it should report DDR5-4800 (PC5-38400) at 1.1V with CAS latency 40, confirming the rated speed and timing are active.

What comes in the package and do I need anything else to install it?

The box contains one 16GB DDR5 4800MHz 288-pin UDIMM; no heat spreader or extra cables are included, and no additional parts are required beyond a compatible motherboard slot.

More in Model-Specific Memory Upgrades

Similar items