We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V ECC Registered RDIMM memory upgrade

SKU CH-B00M-2YDG4

16 GB DDR5-5600 registered ECC RDIMM built for GIGABYTE MZ33-AR1 servers

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact-match 16 GB DDR5-5600 CL46 1Rx8 registered ECC for full-rated speed
  • Verified fit for GIGABYTE MZ33-AR1 motherboard with 288-pin RDIMM slot
  • Registered buffer plus ECC prevents silent data corruption under full load
  • Major OEM Samsung Micron Hynix chips ensure enterprise-grade reliability
  • Lifetime replacement warranty with free US-based technical support

Server memory upgrade

This 16 GB DDR5 RDIMM is built for the GIGABYTE MZ33-AR1 motherboard. It delivers registered ECC operation at 5600 MHz with a CL46 latency and 1.1 V power draw. System administrators upgrading compatible servers will find the exact rank and timing the platform expects.

Installation notes

The module uses the 288-pin RDIMM form factor required by the board; it will not fit UDIMM or SODIMM slots. Population order and maximum capacity per channel are defined in the motherboard manual, so verify the approved configuration before seating the DIMM. No heat spreader is present, so airflow across the module must be maintained by the chassis.

Capacity and headroom

A single 16 GB stick provides registered ECC capacity for memory-bound workloads such as virtualization or database caching. Full-speed operation is sustained only when the board's population rules are followed; exceeding the supported DIMM count per channel will reduce frequency or prevent boot. Buyers needing larger per-slot densities or non-registered memory should look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $475.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $29.75 per GB
Pricier than about 85% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How can I verify the module is running at DDR5 5600 CL46 after installing it in my GIGABYTE MZ33-AR1?

Enter the BIOS or use a system-information tool such as CPU-Z and confirm the memory speed reads 5600 MT/s, the CAS latency shows 46, the voltage is 1.10 V, and the module is reported as a 288-pin Registered ECC DIMM with 1Rx8 organisation.

What is included in the package and do I need any extra parts for installation?

The box contains one 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V CL46 288-pin ECC Registered RDIMM; no heat spreader, cables, or additional hardware are supplied or required.

Which capacity or rank option should I choose for the MZ33-AR1 if I want a single-module upgrade?

This part number MR44800-618K1 is a single 16 GB 1Rx8 Registered ECC RDIMM; select it when your configuration calls for one 16 GB module that matches the board's DDR5 5600 population rules.

More in Model-Specific Memory Upgrades

Similar items