We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 384GB (6x64GB) DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H14SSL-NT

SKU CH-P6C7-H691F

Six 64 GB DDR5 RDIMMs deliver 384 GB of registered ECC memory at 4800 MT/s for the Supermicro H14SSL-NT

  • Total capacity384 GB (6 × 64 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 384 GB total capacity from six matched 64 GB modules for maximum server density
  • DDR5 4800 speed with CL40 timing and 1.1 V voltage for rated performance
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors automatically
  • 2Rx4 dual-rank organization enables full-population stability across all populated slots
  • Verified compatibility with the Supermicro H14SSL-NT motherboard for exact-fit installation

384GB DDR5 ECC RDIMM kit for Supermicro H14SSL-NT

This 384GB kit contains six 64GB DDR5 registered ECC RDIMMs built for the Supermicro H14SSL-NT motherboard. Each module runs at 4800 MT/s with CL40 latency at 1.10V. The 2Rx4 organization and registered buffer let the memory controller address every slot when fully populated.

DDR5-4800 registered ECC limits

DDR5 at 4800 MT/s sets the baseline bandwidth for this platform; the registered buffer adds one cycle of latency but allows full-slot population without signal degradation. ECC corrects single-bit errors on the fly, yet it cannot recover multi-bit failures. The 288-pin RDIMM form factor fits only boards wired for registered memory.

Six 64GB modules fill the board

Six 64GB DIMMs deliver 384GB total capacity, the maximum this kit provides. Population rules on the H14SSL-NT may restrict which slots can be used together, so the full 384GB is only available when the manual's approved configuration is followed. Beyond this kit, larger per-module densities would be required to increase capacity further.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $9,562.99
Pricier than about 86% of the 21,161 comparable items (median $397.99).
Total capacity 384 GB (6 × 64 GB)
Higher than about 85% of the 20,941 comparable items (median 32 GB).
Price per GB $24.90 per GB
Pricier than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-924K6
Total capacity384 GB (6 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items384 GB 6 × 64 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 384GB kit or a smaller capacity for my Supermicro H14SSL-NT?

The 384GB kit provides six 64GB modules. Choose it only if your board's population rules and CPU support allow all slots to run at DDR5 4800. A smaller kit may be required for full-speed operation with certain processors.

What does the DDR5 4800 rating deliver once installed in the H14SSL-NT?

The modules run at 4800 MT/s with CL40 latency at 1.1V. Registered ECC buffers the command bus so all six slots operate at rated speed without downclocking, while ECC corrects single-bit errors in real time.

How does the 288-pin RDIMM interface limit performance on this platform?

The 288-pin RDIMM form factor is mandatory for the H14SSL-NT. It caps the kit to DDR5 4800 (PC5-38400) dual-rank operation; UDIMM or SODIMM modules will not fit or function in this server board.

More in Model-Specific Memory Upgrades

Similar items