We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V CL46 288-PIN ECC Registered RDIMM memory upgrade

SKU CH-DM1Y-9MQP8

16 GB DDR5 5600 MHz ECC registered RDIMM for GIGABYTE MZ23-SU0 servers

  • Total capacity16 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 16GB

Show 24 more
  • 16 GB DDR5 5600 MHz ECC RDIMM adds reliable capacity to GIGABYTE MZ23-SU0 servers
  • Registered 1Rx8 design at 1.1 V keeps every slot stable at full population
  • CL46 CAS latency delivers rated PC5-44800 throughput without manual tuning
  • Major OEM Samsung, Micron or Hynix chips provide enterprise-grade signal integrity
  • Lifetime replacement warranty with US-based technical support protects the investment

Exact-match server upgrade

This 16 GB DDR5-5600 module is built for the GIGABYTE MZ23-SU0 motherboard and other platforms that require a 288-pin RDIMM with registered ECC. The 1Rx8 rank, 1.1 V operation and CL46 timing match the controller's expectations so the full capacity is recognised at rated speed.

Registered ECC stability

Registered buffering reduces electrical load on the memory controller, allowing every slot to be populated without signal degradation. On-die ECC detects and corrects single-bit errors in flight, preventing silent data corruption and unplanned reboots in production workloads. The bare-module design omits a heat spreader, so clearance inside dense server chassis is not compromised.

Replaces mismatched or slower memory

When existing DIMMs differ in rank, voltage or timing, the system often down-clocks or refuses to boot. Swapping to this spec-matched kit restores the intended DDR5-5600 throughput and full registered ECC protection. The jump is worth it when your current configuration forces reduced speed, limited capacity or lacks error correction.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $460.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $28.81 per GB
Pricier than about 81% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K1
Total capacity16 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the DDR5 5600MHz PC5-44800 interface limit the module to 5600 MT/s on the GIGABYTE MZ23-SU0?

The module is rated DDR5 5600 (PC5 44800) with CL46 at 1.1V. On the MZ23-SU0 it will run at up to 5600 MT/s when the memory controller and BIOS support that speed with registered ECC DIMMs.

Will the 288-pin RDIMM fit the GIGABYTE MZ23-SU0 motherboard slots without a heat spreader?

Yes. It uses the standard 288-pin DDR5 RDIMM form factor the board requires. No heat spreader is included, so clearance is the same as any bare registered DIMM.

What is the correct population order when installing this 1Rx8 registered ECC module on the MZ23-SU0?

Follow the motherboard manual for approved DIMM population order. Registered ECC modules must be installed in the sequence the manual specifies for full capacity and rated speed recognition.

More in Model-Specific Memory Upgrades

Similar items