We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5-4800 ECC RDIMM 2Rx4 CL40 1.1V GIGABYTE MA34-CP0 memory upgrade

SKU CH-W890-5BQSA

A 192 GB DDR5 ECC RDIMM kit (2 × 96 GB) at 4800 MT/s, CL40, 1.1 V, 2Rx4 registered, validated for the GIGABYTE MA34-CP0 motherboard

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 192 GB capacity from two 96 GB modules for dense server workloads
  • DDR5-4800 speed with CL40 latency matching board timing requirements
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 10 V operation at 2Rx4 rank meets exact voltage and density specs
  • 288-pin RDIMM form factor verified for GIGABYTE MA34-CP0 motherboard

Exact-fit 192GB DDR5 kit

This 192GB kit delivers two 96GB DDR5-4800 RDIMMs built to the GIGABYTE MA34-CP0 motherboard's exact specifications. Registered ECC operation with CL40 timing at 1.1V provides the stability enterprise workloads require. It is intended for administrators expanding memory capacity on this specific server platform.

Verify motherboard population rules

Confirm the MA34-CP0 manual for approved DIMM population order, maximum supported capacity per slot, and any BIOS version requirements before installation. Registered RDIMMs must match the board's memory controller expectations for rank structure and voltage to be recognised at full speed. Mismatched population can prevent boot or limit usable capacity.

Registered ECC with major OEM chips

Each module uses Samsung, Micron or Hynix components in a 2Rx4 registered layout without heat spreaders. The 288-pin RDIMM form factor fits only DDR5 RDIMM slots; it will not work in UDIMM or SODIMM sockets. Buffered architecture reduces electrical load on the memory controller when all slots are populated.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,552.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $28.92 per GB
Pricier than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items192 GB 2 × 96 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 192 GB kit ship as two 96 GB DIMMs or do I need to buy anything else?

The kit contains two 96 GB DDR5 RDIMMs for a total of 192 GB; no extra modules or accessories are required.

Why choose the 192 GB (2 x 96 GB) CL40 kit over a lower-capacity option?

This 2Rx4 Registered ECC kit matches the GIGABYTE MA34-CP0 motherboard's qualified speed of 4800 MT/s and voltage of 1.1 V, allowing full-capacity population at rated timings.

What does the CL40 rating mean when the kit is installed in the MA34-CP0?

CAS latency of 40 cycles at 4800 MT/s is the timing the board's memory controller expects, so the DIMMs run at their rated speed without downclocking.

More in Model-Specific Memory Upgrades

Similar items