We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks, bare chips, no heat spreader

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 CL46 ECC RDIMM memory upgrade

SKU CH-ANPS-NKSDF

A 192 GB DDR5 5600 CL46 ECC registered dual-rank kit built for Supermicro server motherboards

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Buffer typeRegistered
  • Rated voltage1.1 V
  • 192 GB total capacity for memory-intensive server workloads using 2 x 96 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth for high-throughput data processing
  • ECC registered RDIMM design detects and corrects errors to protect mission-critical data
  • 1 V operating voltage reduces power draw in dense Supermicro server deployments
  • 2Rx4 dual-rank organisation on 288-pin DDR5 RDIMM form factor for broad compatibility

192GB DDR5 ECC RDIMM kit

This 192GB kit contains two 96GB registered DDR5 modules built for SuperMicro B13SEG motherboards. It targets administrators expanding memory capacity in enterprise servers or workstations that require error-correcting registered DIMMs. Each module operates at 1.1V with CL46 latency and a 2Rx4 rank configuration.

Sustained load behaviour

Modules are stress tested under load to verify stability during continuous enterprise workloads such as virtualisation, database serving and AI training tasks. Registered buffering and on-die ECC maintain data integrity across extended duty cycles without the signal degradation sometimes seen in unbuffered alternatives. The 5600 MT/s rating delivers consistent throughput for memory-bound server applications.

Pre-order compatibility check

Confirm that your SuperMicro B13SEG platform supports 96GB density RDIMMs at DDR5 5600 and that the BIOS revision recognises 2Rx4 organisation. Verify available DIMM slots for a two-module population and ensure the memory controller can address the full 192GB capacity. DDR5 modules are keyed differently from earlier generations and will not fit non-DDR5 sockets.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,371.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $27.98 per GB
Pricier than about 78% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineSuperMicro Server/Workstation Compatible Series Memory
Model nameSupermicro DDR5 4800 MHz ECC RDIMM Registered Server Memory
Part numberMR44800-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-PIN DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Heat spreaderNo
Memory rank2Rx4
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB (2 × 96 GB) DDR5 5600 MHz PC5-44800 2Rx4 1.1 V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

How much power does the 192GB DDR5 5600 kit draw at its 1.10V operating voltage?

Each module runs at 1.10V, the standard DDR5 voltage for registered DIMMs; total system power depends on the server platform and workload.

What motherboard slot and chipset support are required to install these 288-pin RDIMMs?

They need a Supermicro motherboard with DDR5 RDIMM slots and a chipset that supports 5600 MT/s registered ECC memory.

Will the CL46 5600 modules run stably alongside existing 4800 MT/s DDR5 RDIMMs in the same server?

The memory controller will down-clock all modules to the lowest common speed, so 4800 MT/s RDIMMs and these 5600 MT/s modules can operate together at 4800 MT/s.

More in Model-Specific Memory Upgrades

Similar items