We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, bare chips, no heat spreader

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 ECC RDIMM CL46 1.1V Supermicro X14SDW-42C-SP9F memory upgrade

SKU CH-4623-Z2P0M

192GB DDR5-5600 ECC registered server memory kit with two 96GB modules at CL46 and 1.1V for the Supermicro X14SDW-42C-SP9F

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

  • 192 GB total capacity in a matched 2 x 96 GB kit
  • DDR5 5600 speed (PC5-44800) for high-throughput server workloads
  • Registered ECC RDIMM architecture with 2Rx4 rank for full-slot stability
  • CL46 latency at 1.1 V for efficient, error-correcting operation
  • Validated compatibility with Supermicro X14SDW-42C-SP9F motherboard

Supermicro X14SDW-42C-SP9F Memory Kit

This 192GB kit contains two 96GB DDR5 RDIMMs built for the Supermicro X14SDW-42C-SP9F motherboard. The modules run at 5600 speed with CL46 timing at 1.1V. Registered ECC design suits server workloads that require data integrity.

Registered ECC Architecture

Registered buffering reduces electrical load on the memory controller so all slots can be fully populated at rated capacity. ECC corrects single-bit errors automatically to prevent silent data corruption and unexpected reboots. No heat spreader is included on these modules.

DDR5 5600 288-Pin RDIMM Form Factor

The 288-pin DDR5 RDIMM form factor is the single specification that determines compatibility with the target motherboard. UDIMM or SODIMM modules will not fit or function in this system. Verify your board's population rules and maximum supported capacity before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $6,114.99
Pricier than about 82% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $31.85 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 2 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 96GB 2Rx4 RDIMMs need any firmware updates or periodic reseating to stay reliable?

No firmware updates or scheduled reseating are required; the modules are validated for the Supermicro X14SDW-42C-SP9F and run at the rated DDR5-5600 CL46 1.10V settings for the life of the kit.

What capacity ceiling does the motherboard impose when all slots are filled with these 96GB 2Rx4 modules?

The Supermicro X14SDW-42C-SP9F memory population rules determine the maximum supported capacity; consult the board manual for the exact per-slot and total limits before installing the full 192GB kit.

How much heat and power will the 192GB kit generate during continuous 24/7 server workloads?

Each 96GB RDIMM operates at 1.10V DDR5 standard voltage with no heat spreader; registered buffering reduces electrical load on the memory controller, keeping thermals and power draw within normal server DIMM ranges for sustained operation.

More in Model-Specific Memory Upgrades

Similar items