We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 192GB 6x32GB DDR5 5600 CL46 2Rx8 ECC Registered RDIMM memory upgrade for GIGABYTE MZ73-LM0

SKU CH-GV2E-19AYP

A 192GB DDR5 ECC Registered RDIMM kit of six 32GB modules running at 5600MHz CL46 1.1V, validated for the GIGABYTE MZ73-LM0 motherboard

  • Total capacity192 GB (6 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 192 GB kit enables maximum server capacity
  • 6 x 32 GB modules fill every slot correctly
  • DDR5 5600 CL46 runs at rated speed
  • Registered ECC prevents silent data corruption
  • 1 V 288-pin RDIMM matches board requirements

Exact-match DDR5 server kit

This 192GB kit delivers six 32GB DDR5 5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the GIGABYTE MZ73-LM0 memory controller expects. It targets administrators who need full-capacity population on that specific platform. Buyers requiring a different motherboard or non-ECC memory should look elsewhere.

288-pin Registered form factor

Each module uses the 288-pin RDIMM form factor this board requires, not a UDIMM or SODIMM, so it seats directly in the server's DIMM slots without adapters. The registered architecture buffers address and command signals, allowing every slot to run fully populated at the rated 5600 speed. Systems needing unbuffered modules cannot use this kit.

Low-voltage stability

Operating at 1.1V with CL46 latency, the modules draw minimal power while ECC corrects single-bit errors on the fly to prevent silent data corruption. Registered buffering reduces electrical load on the memory controller during sustained workloads. No heat spreaders are fitted, so adequate chassis airflow is necessary for thermal management.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,399.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (6 × 32 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $28.12 per GB
Pricier than about 79% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-328K6
Total capacity192 GB (6 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items192 GB 6 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What DDR5 speed does this 192GB kit run at and what bandwidth does that provide?

The kit runs at DDR5 5600 (PC5-44800), delivering 44800 MB/s of peak bandwidth per module when the memory controller is configured for that speed.

What physical slot and form factor do these modules need on the GIGABYTE MZ73-LM0?

They require 288-pin DDR5 RDIMM slots; the board must accept registered DIMMs, not UDIMM or SODIMM, and all six slots must be populated for the full 192GB capacity.

How should the six 32GB modules be installed and what step is commonly missed?

Follow the motherboard manual's exact DIMM population order for six modules; the step often missed is verifying the approved slot sequence before seating all modules.

More in Model-Specific Memory Upgrades

Similar items