We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 1TB 8x128GB DDR5 5600MHz PC5-44800 2Rx4 CL46 1.1V ECC Registered RDIMM Kit for GIGABYTE MA34-CP0

SKU CH-PYGK-MREJ6

1 TB server memory kit with eight 128 GB DDR5 RDIMMs running at 5600 MHz, CL46, 1.1 V, registered ECC for GIGABYTE MA34-CP0

  • Total capacity1 TB (8 × 128 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 1TB kit maximises server capacity with eight 128GB modules
  • DDR5 5600MHz speed delivers rated bandwidth for data-intensive workloads
  • Registered ECC design corrects single-bit errors to prevent silent data corruption
  • 10V operation matches platform voltage for stable full-population performance
  • Verified compatibility with GIGABYTE MA34-CP0 motherboard ensures correct fitment

Exact-Match DDR5 Kit for GIGABYTE MA34-CP0

This 1 TB kit contains eight 128 GB DDR5-5600 RDIMMs built to the PC5-44800 standard. Registered ECC design with 2Rx4 organisation and CL46 timing matches the memory controller expectations of the GIGABYTE MA34-CP0 motherboard so the full capacity is recognised at rated speed.

Installing Eight Registered DIMMs

The 288-pin RDIMM form factor seats only in DDR5 RDIMM slots; UDIMM or SODIMM sockets will not accept them. Population order matters on this platform, so follow the motherboard manual for the approved slot sequence and torque the retention levers evenly to avoid bent pins or incomplete seating.

Sustained Enterprise Stability

Registered architecture buffers the command bus, allowing all eight slots to remain fully populated at 5600 MT/s without signal degradation. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during continuous workloads. The 1.1 V operating voltage keeps power draw consistent across extended duty cycles.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $32,135.99
Pricier than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 1 TB (8 × 128 GB)
Higher than about 93% of the 20,941 comparable items (median 32 GB).
Price per GB $32.14 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-724K8
Total capacity1 TB (8 × 128 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items1 TB 8 × 128 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How can I verify the kit is running at DDR5 5600 with CL46 after installation?

Check the BIOS or a tool such as CPU-Z to confirm the memory reports 5600 MT/s and CAS latency 46 across all eight modules.

What exactly ships in the box and is anything else required?

The box contains the 1 TB kit — eight 128 GB 288-pin DDR5 RDIMMs. No extra parts are needed for installation on the GIGABYTE MA34-CP0.

This kit is a single 1 TB 8×128 GB version — how do I know it is the right one for my board?

The part number MR44800-724K8 matches the GIGABYTE MA34-CP0's qualified DDR5 5600 registered ECC 2Rx4 specification, so this exact kit is the supported configuration.

More in Model-Specific Memory Upgrades

Similar items