We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 256GB 2x128GB DDR5 4800 CL40 1.1V ECC RDIMM Supermicro H14DSG-OD

SKU CH-7Q79-9NAF2

256 GB DDR5 4800 CL40 ECC registered RDIMM kit (2 × 128 GB, 1.1 V, 288-pin) validated for the Supermicro H14DSG-OD motherboard

  • Total capacity256 GB (2 × 128 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H14DSG-OD
  • Registered ECC architecture corrects single-bit errors and supports full population stability
  • 1 V operation matches the motherboard's voltage requirement for reliable compatibility
  • 288-pin RDIMM form factor fits the exact slot type the board requires

Exact-match DDR5 kit

This 256GB kit contains two 128GB DDR5 4800 modules built to the precise rank, voltage and timing the Supermicro H14DSG-OD memory controller expects so the server recognises full capacity at rated speed.

Registered ECC RDIMM

The single specification that decides fitment is the 288-pin Registered ECC RDIMM form factor with 2Rx4 organisation and 1.1V operation; a UDIMM, SODIMM or different rank structure will not work in this board.

Straightforward slot install

Installation follows the motherboard manual population order for registered DIMMs; the usual issue is mixing ranks or skipping required slots which prevents the system from posting at full capacity.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $7,082.99
Pricier than about 83% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (2 × 128 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $27.67 per GB
Pricier than about 77% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-724K2
Total capacity256 GB (2 × 128 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items256 GB 2 × 128 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will 4800 MT/s DDR5 run at that speed on a Supermicro H14DSG-OD?

The kit is rated DDR5-4800 (PC5-38400) with CL40 and 1.10 V. When installed in the validated H14DSG-OD platform the memory controller recognises the exact rank, voltage and timing, so it initialises at the rated 4800 MT/s without down-clocking.

Does the registered ECC design change what the DDR5 bus can deliver?

Registered (buffered) RDIMMs offload the memory controller, letting every slot run fully populated at the full 4800 MT/s rate while on-die ECC corrects single-bit errors before they reach the OS.

What physical slot and clearance does this 288-pin RDIMM need?

It uses the standard 288-pin DDR5 RDIMM form factor — no heat spreader — so it fits any DDR5 RDIMM slot on the H14DSG-OD following the board's population order.

More in Model-Specific Memory Upgrades

Similar items