We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5 4800 CL40 ECC RDIMM Supermicro H14DSG-OM

SKU CH-R8QQ-H74WJ

A 256GB DDR5-4800 ECC registered RDIMM kit built to the Supermicro H14DSG-OM motherboard's exact rank, voltage and timing requirements

  • Total capacity256 GB (4 × 64 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 256 GB kit fills four slots for maximum server capacity
  • DDR5-4800 CL40 at 1.1 V matches the motherboard's rated speed
  • Registered ECC RDIMM corrects single-bit errors to prevent data corruption
  • 2Rx4 288-pin modules align with the board's population rules
  • Samsung, Micron or Hynix chips deliver enterprise-grade stability

Exact-match DDR5-4800 ECC RDIMM kit

This 256GB kit contains four 64GB DDR5 modules rated at 4800 MT/s with CL40 latency and 1.1V operation. Registered ECC architecture provides error correction and signal buffering for stable operation in fully populated server configurations. Designed specifically for the Supermicro H14DSG-OM motherboard.

288-pin RDIMM installation notes

Modules install vertically into the motherboard's 288-pin DDR5 RDIMM slots following the population order in your system manual. Registered DIMMs add slight insertion resistance compared to unbuffered types; press evenly until both latches engage. Common issues include mixing ranks or voltages across channels and skipping the board's required population sequence.

Pre-order configuration checks

Verify the motherboard's qualified vendor list for 64GB 2Rx4 registered modules at 4800 MT/s. Confirm the maximum supported capacity per slot and total system limit. Check BIOS version requirements for DDR5-4800 operation with four DIMMs installed. Ensure your chassis airflow accommodates modules without heat spreaders.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $7,227.99
Pricier than about 83% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (4 × 64 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $28.23 per GB
Pricier than about 79% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-924K4
Total capacity256 GB (4 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items256 GB 4 × 64 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How can I confirm the 256GB kit is running at DDR5 4800 CL40 after installation?

Enter the system BIOS or UEFI and verify the memory speed shows 4800 MT/s, CAS latency reads CL40, voltage is 1.10V, and all four 64GB modules are detected for the full 256GB capacity.

What comes in the box and do I need any extra parts for the Supermicro H14DSG-OM?

The package contains the 256GB kit as four 64GB DDR5 288-pin ECC Registered RDIMMs; no additional cables, brackets or cooling are required for this motherboard.

Should I choose this 4x64GB kit or a different capacity for the H14DSG-OM?

Select this 256GB 4x64GB 2Rx4 Registered ECC kit when your configuration calls for four DIMMs at the board's native DDR5 4800 speed; other capacities or ranks may not match the memory population rules.

More in Model-Specific Memory Upgrades

Similar items