We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 256GB (8 x 32GB) DDR5 4800 ECC Registered RDIMM CL40 1.1V memory upgrade

SKU CH-SQWQ-QKAKS

Eight 32 GB DDR5 ECC registered RDIMMs running at 4800 MHz with CL40 latency and 1.1 V operation for the Supermicro H14DST-FL motherboard

  • Total capacity256 GB (8 × 32 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 256GB 8X32GB

Show 30 more
  • 256 GB total capacity from eight 32 GB modules for dense server workloads
  • DDR5 4800 speed rated at PC5-38400 with CL40 latency for rated throughput
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 1 V operating voltage matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DST-FL motherboard compatibility

256GB DDR5 ECC RDIMM kit for Supermicro H14DST-FL

This 256GB kit contains eight 32GB DDR5 4800 RDIMMs built to the exact rank, voltage and timing the Supermicro H14DST-FL memory controller expects. Registered ECC architecture allows every slot to run fully populated at rated speed while correcting single-bit errors on the fly. It is not suited for workstations that require unbuffered UDIMMs or for systems limited to lower maximum capacities.

Capacity and headroom

Eight 2Rx8 modules deliver 256GB total capacity at DDR5 4800 (PC5 38400) with CL40 latency and 1.10V operation. Full population is supported by the registered design, so the board can address the complete kit without downclocking. Headroom ends at the motherboard's qualified maximum; configurations needing more memory or faster speeds than the platform validates cannot use this kit.

Thermals, noise and power

Modules operate at the standard DDR5 1.1V without heat spreaders, relying on server chassis airflow for cooling. Power draw scales with all eight slots active, but registered buffering reduces electrical load on the memory controller. No fans or moving parts are present, so the kit adds no acoustic noise beyond the system's existing cooling.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $6,749.99
Pricier than about 83% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (8 × 32 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $26.37 per GB
Pricier than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-328K8
Total capacity256 GB (8 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items256 GB 8 × 32 GB DDR5 4800 MHz PC5-38400 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 288-pin DDR5 4800 RDIMM kit work in my Supermicro H14DST-FL alongside any existing DDR5 modules?

The kit is verified for the Supermicro H14DST-FL. Matching speed, voltage, rank and ECC type avoids timing conflicts, but mixed-capacity population rules are set by the motherboard manual.

How can I confirm the 256 GB kit is running at DDR5 4800 with ECC active after installation?

Enter the BIOS or UEFI and verify the memory speed reads 4800 MT/s, total capacity shows 256 GB, and ECC status is reported as enabled or active.

Does the 8 x 32 GB package include heat spreaders or any cables, or must I buy them separately?

The modules ship without heat spreaders and no cables are included; the kit contains only the eight 288-pin RDIMMs.

More in Model-Specific Memory Upgrades

Similar items