We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5-5600 CL46 ECC RDIMM for GIGABYTE MA34-CP0

SKU CH-ZV5S-3KAS2

32 GB DDR5-5600 ECC registered RDIMM kit in two 16 GB modules, validated for the GIGABYTE MA34-CP0 motherboard

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 32GB 2X16GB

Show 24 more
  • 32 GB total capacity from two 16 GB modules for full server density
  • DDR5-5600 speed rated at PC5-44800 for high bandwidth workloads
  • Registered ECC design corrects single-bit errors and buffers the memory bus
  • CL46 latency at 1.10 V matches the GIGABYTE MA34-CP0 memory controller exactly
  • 288-pin RDIMM form factor ensures physical and electrical fit in the target board

System-Specific DDR5 RDIMM Kit

This 32 GB kit contains two 16 GB DDR5-5600 Registered ECC modules built for the GIGABYTE MA34-CP0 motherboard. Each stick runs at 1.1 V with CL46 latency and a 1Rx8 organisation. The registered design ensures the memory controller sees a single electrical load per slot.

DDR5 Registered DIMM Constraints

Registered DIMMs add a buffer between the DRAM and the memory controller, so they only work in platforms wired for RDIMM signalling. Mixing them with unbuffered UDIMMs or SODIMMs prevents the system from posting. Population rules and maximum capacity per channel are defined by the motherboard firmware, not by the modules themselves.

CL46 Latency at 5600 MT/s

The CAS latency of CL46 at DDR5-5600 determines the minimum cycle delay the controller must satisfy for stable operation. If the platform cannot meet this timing at the rated frequency, it will down-clock the kit or refuse to boot. Verify that your BIOS supports CL46 at 5600 MT/s before purchasing.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $898.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $28.09 per GB
Pricier than about 79% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items32 GB 2 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 2×16 GB kit or a single 32 GB module for my GIGABYTE MA34-CP0?

The 2×16 GB kit fills two slots with 1Rx8 registered DIMMs, letting the memory controller run all channels at the rated 5600 MT/s; a single 32 GB module would leave a channel empty and can reduce bandwidth.

What does the 5600 MT/s rating mean once the kit is installed in the server?

The modules operate at DDR5-5600 (PC5-44800) with CL46 latency at 1.10 V, delivering the exact data rate and timing the motherboard's memory controller expects for full-speed operation.

Does the 288-pin RDIMM interface limit how many modules I can install on this board?

The registered 288-pin RDIMM design offloads the memory controller, so every supported slot on the MA34-CP0 can be populated at full capacity while maintaining the rated 5600 MT/s speed.

More in Model-Specific Memory Upgrades

Similar items