We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 32GB 2x16GB DDR5 5600MHz CL46 1.1V 288-pin UDIMM Kit for ASRock B650M-C

SKU CH-87M9-HGD6N

32 GB kit of two 16 GB DDR5 5600 MHz CL46 1.1 V 288-pin UDIMM modules validated for the ASRock B650M-C motherboard

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered
  • 32 GB kit delivers full capacity for multitasking with two 16 GB DDR5 modules
  • DDR5-5600 speed matches the motherboard's rated frequency for stable operation
  • CL46 latency and 1.10 V voltage meet the memory controller's exact timing requirements
  • 288-pin unbuffered UDIMM form factor fits the ASRock B650M-C DIMM slots precisely
  • Built with major OEM chips from Samsung, Micron or Hynix for tested reliability

Exact-match upgrade for ASRock B650M-C

This 32 GB kit delivers two 16 GB DDR5 modules rated at 5600 MT/s with CL46 timing at 1.1 V. It is built for desktop systems that require 288-pin unbuffered non-ECC UDIMMs and matches the memory controller expectations of the ASRock B650M-C motherboard. The 1Rx8 rank configuration ensures full capacity recognition at the rated speed. Builders seeking a direct replacement for factory memory will find the specification alignment straightforward.

Major OEM chips and standard UDIMM form factor

Modules use Samsung, Micron or Hynix components tested for stability at the rated frequency, latency and voltage. The 288-pin UDIMM design fits the desktop DIMM slots on the target board without adapters or special mounting hardware. No heat spreader is included, so clearance around the slots remains unchanged. Buyers who need ECC error correction or registered signalling should look elsewhere, as this kit provides neither.

Low-voltage operation at rated speed

Running at 1.1 V, the kit draws minimal power while maintaining 5600 MT/s throughput. The absence of a heat spreader means the modules rely on case airflow for cooling, which is typical for standard JEDEC-speed DDR5. Acoustic impact is zero because there are no moving parts. Systems that cannot supply 1.1 V DDR5 or that require higher-voltage XMP profiles will not benefit from this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $471.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $14.75 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsASRock
In the box
Included items32 GB 2 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does DDR5 5600 PC5-44800 run at its rated speed on the ASRock B650M-C without manual tuning?

Yes, the kit is spec-matched to the board's memory controller so it is recognised at full capacity and runs at DDR5 5600 with CL46 at 1.1 V without extra configuration.

Will two 1Rx8 288-pin UDIMM modules fit the ASRock B650M-C DIMM slots?

The board uses standard 288-pin DDR5 UDIMM slots; each 16 GB 1Rx8 module fits directly and the 2 x 16 GB kit matches the board's population rules.

How do I install the modules so the system boots at 5600 MHz instead of a lower speed?

Power off, open the case, align each module's notch with the slot key, press firmly until both retention clips click, then power on — the board will train at DDR5 5600 automatically.

More in Model-Specific Memory Upgrades

Similar items