We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 UDIMM modules without heat spreaders in a matched pair

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600MHz CL46 1.1V 288-pin UDIMM memory upgrade for Supermicro X14SAZ-F

SKU CH-DT4Y-2T9EN

A 32 GB kit of two 16 GB DDR5 5600 MHz CL46 1.1 V 288-pin UDIMM modules verified for the Supermicro X14SAZ-F motherboard

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 32GB 2X16GB

  • 32 GB capacity from two 16 GB modules for multitasking headroom
  • DDR5 5600 MT/s speed transfers data at PC5-44800 bandwidth
  • CL46 CAS latency and 1.10 V voltage match the board's timing expectations
  • 288-pin UDIMM form factor fits the Supermicro X14SAZ-F DIMM slots exactly
  • Built with Samsung, Micron or Hynix chips tested for stability at rated specs

Exact-match upgrade for Supermicro X14SAZ-F

This 32GB kit delivers two 16GB DDR5 UDIMMs rated at 5600MHz with CL46 latency and 1.1V operation. It is built for the Supermicro X14SAZ-F motherboard, matching the rank, voltage and timing the board's memory controller expects so the full capacity is recognised at rated speed.

DDR5 UDIMM interface constraints

The modules use the 288-pin DDR5 UDIMM form factor and run at the standard 1.1V JEDEC voltage. They are non-ECC and unbuffered, so they cannot be used in systems that require registered or error-correcting memory. The fixed CL46 timing is set by the SPD profile and cannot be tightened without manual adjustment.

32GB capacity for mainstream workloads

The 32GB total provides comfortable headroom for everyday multitasking, office applications and light content creation. It will run out when running large virtual-machine clusters, heavy rendering jobs or datasets that exceed the installed capacity, at which point the system must swap to storage.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $418.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $13.09 per GB
Pricier than about 59% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 2 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 32 GB kit or a single 16 GB module?

The 32 GB kit provides two matched 16 GB modules for dual-channel operation on the Supermicro X14SAZ-F, while a single module would run in single-channel mode.

What does DDR5-5600 CL46 mean for real-world performance?

The modules run at 5600 MT/s with a CAS latency of 46 cycles, delivering the rated bandwidth and timing the motherboard's memory controller expects.

Is this a 288-pin DDR5 UDIMM and what speed ceiling does that impose?

Yes, it is a 288-pin DDR5 UDIMM operating at 5600 MT/s (PC5-44800); the motherboard's memory controller caps the maximum supported data rate.

More in Model-Specific Memory Upgrades

Similar items