We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 SODIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600MHz CL46 1.1V ECC SODIMM memory upgrade

SKU CH-BJRV-5NFZM

32 GB DDR5 ECC SODIMM kit running at 5600 MHz CL46 for the Supermicro X14SAV-TLN4F motherboard

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 32GB 2X16GB

  • 32 GB capacity across two 16 GB modules for high-density DDR5 upgrades
  • DDR5 5600 speed with CL46 latency matches rated system performance
  • 10 V operation reduces power draw while maintaining stability
  • On-die ECC corrects single-bit errors to protect data integrity
  • 262-pin unbuffered SODIMM form factor fits Supermicro X14SAV-TLN4F motherboard

Exact DDR5 5600 ECC SODIMM kit

This 32 GB kit delivers two 16 GB DDR5 5600 modules built to the PC5-44800 standard. Each stick is a 262-pin unbuffered ECC SODIMM rated at CL46 and 1.1 V with a 1Rx8 organisation. It targets technicians upgrading or repairing the Supermicro X14SAV-TLN4F motherboard where ECC SODIMM memory is required.

Replaces non-ECC or slower DDR5 SODIMMs

The jump is worth it when the platform demands error-correcting memory and the exact 5600 MT/s data rate for stability. Systems that currently run non-ECC modules or lower-speed DDR5 will gain single-bit error correction and the rated frequency the memory controller expects. Buyers needing higher capacity per slot or registered DIMM form factors cannot use this kit.

Check your system manual before ordering

Verify that the motherboard accepts 262-pin unbuffered ECC SODIMMs and supports a 32 GB two-module population. Confirm the approved slot-filling order and any BIOS version requirements listed by Supermicro. Ensure the platform does not require registered or load-reduced DIMMs instead of the unbuffered type supplied here.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $616.99
Pricier than about 54% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $19.28 per GB
Pricier than about 65% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 ECC Unbuffered SODIMM Memory
Part numberMSE44800-618K2
Total capacity32 GB (2 × 16 GB)
Product type262-Pin DDR5 ECC SODIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 2 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 262-PIN ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 262-pin DDR5 SODIMM modules fit the Supermicro X14SAV-TLN4F motherboard slots?

Yes, the kit uses the exact 262-pin DDR5 ECC SODIMM form factor required by the X14SAV-TLN4F, so each 16 GB module seats directly in the board's memory sockets without adapters.

What is the correct installation order for the two 1Rx8 modules on this motherboard?

Populate the first slot designated in the Supermicro manual for single-rank ECC SODIMMs, then add the second module to the next approved slot; skipping the prescribed population sequence is the step most often missed.

When should the ECC SODIMM kit be replaced or checked for errors?

Run a memory diagnostic if the system logs corrected ECC events, experiences unexplained reboots, or after several years of continuous operation; the modules themselves have no moving parts and require no scheduled maintenance.

More in Model-Specific Memory Upgrades

Similar items