We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR5 5600 CL46 1.1V UDIMM Supermicro X13SAQ memory upgrade

SKU CH-N30Y-X0GSX

A 32 GB DDR5 kit of four 8 GB UDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro X13SAQ motherboard

  • Total capacity32 GB (4 × 8 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 32GB 4X8GB

  • 32 GB capacity across four 8 GB modules expands multitasking headroom
  • DDR5 5600 speed with CL46 latency delivers rated throughput for Supermicro X13SAQ
  • 10 V operation matches the board's memory-controller specification exactly
  • 1Rx8 unbuffered UDIMM layout fits the required 288-pin slot configuration
  • Built with major OEM chips from Samsung, Micron or Hynix for tested stability

Supermicro X13SAQ DDR5 upgrade

This 32GB kit (4 x 8GB) is built as an exact-match memory upgrade for the Supermicro X13SAQ motherboard. It uses 288-pin DDR5 UDIMM modules that the board's memory controller recognises at full capacity and rated speed.

Verified fitment and tested reliability

The kit matches the board's required 1Rx8 Non-ECC unbuffered layout at 1.10V and CL46 timing. Modules are assembled with major OEM chips from Samsung, Micron or Hynix and tested for stability at DDR5 5600 (PC5 44800) so the system runs at the specified speed without manual tuning.

Builders updating a Supermicro X13SAQ

Suitable for administrators or integrators adding 32GB to a compatible X13SAQ platform using the supported DIMM population order. Not suited for systems that require ECC registered DIMMs, SODIMM form factors, different DDR generations, or capacities beyond what the motherboard manual approves.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $451.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB (4 × 8 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $14.12 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-818K4
Total capacity32 GB (4 × 8 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 4 × 8 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 288-pin DDR5 modules need any firmware updates or thermal paste replacement over time?

No firmware updates or thermal paste are required; the 1.10 V UDIMM has no heat spreader and runs at its rated 5600 MT/s CL46 for the life of the kit.

What limit appears first when the four 1Rx8 sticks run continuously at 5600 MHz?

The memory controller’s maximum supported capacity and population rules for the Supermicro X13SAQ board are the first constraints you will reach.

How much heat and power draw should I expect from the 32 GB kit at 1.1 V all day?

At 1.1 V the modules draw minimal power and produce low heat; with no spreader they rely on normal case airflow to stay within specification.

More in Model-Specific Memory Upgrades

Similar items