We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 UDIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 32GB 2x16GB CL46 1.1V UDIMM Supermicro X13SAW-TLN4F memory upgrade

SKU CH-SAX8-CQST4

32 GB dual-channel DDR5 kit with two 16 GB modules at 5600 MHz, CL46, 1.1 V, verified for the Supermicro X13SAW-TLN4F motherboard

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 32GB 2X16GB

  • Exact DDR5-5600 match for Supermicro X13SAW-TLN4F board
  • 32 GB dual-channel kit (2 × 16 GB) 1Rx8 CL46 1.10 V
  • Major OEM chips from Samsung, Micron, Hynix tested at rated speed
  • 288-pin unbuffered UDIMM form factor fits desktop motherboard slots
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR5-5600 kit for Supermicro

This 32 GB kit contains two 16 GB DDR5 UDIMMs rated at 5600 MT/s with CL46 latency and 1.1 V operation. The modules are non-ECC, unbuffered, single-rank 1Rx8 parts built with major OEM chips. They are specified for the Supermicro X13SAW-TLN4F motherboard.

Verify motherboard manual for population rules

Before ordering, consult the system or motherboard manual to confirm supported capacities, approved DIMM population order, and installation steps. Ensure the board accepts 288-pin DDR5 UDIMMs at 1.1 V and that the two-module configuration matches the required slot layout.

Suits builders upgrading the named Supermicro

This kit suits users who need a validated 32 GB DDR5-5600 upgrade for the specific Supermicro motherboard listed. It is not for systems that require ECC or registered modules, boards limited to lower DDR5 speeds, or builds needing more than 32 GB of memory.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $434.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $13.59 per GB
Pricier than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 2 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What comes in the 32 GB kit and is anything else required?

The kit contains two 16 GB DDR5 UDIMM modules; no extra parts or cables are needed for installation.

Should I choose this 32 GB kit or a different capacity for the Supermicro X13SAW-TLN4F?

This 32 GB (2 x 16 GB) kit matches the board's DDR5 5600 specification; other capacities would need separate compatibility verification.

What does the DDR5 5600 rating mean once the modules are installed in the Supermicro board?

The memory will run at 5600 MT/s with CL46 latency at 1.1 V, delivering the rated PC5-44800 bandwidth.

More in Model-Specific Memory Upgrades

Similar items