We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 UDIMM modules without heat spreaders in a kit

NEMIX RAM

NEMIX RAM 32GB 4x8GB DDR5 5600 PC5-44800 CL46 1.1V 1Rx8 UDIMM Supermicro X14SAE memory upgrade

SKU CH-V5XG-KMKFH

32 GB DDR5 kit with four 8 GB UDIMMs at 5600 MHz, CL46 and 1.1 V for Supermicro X14SAE motherboards

  • Total capacity32 GB (4 × 8 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 32GB 4X8GB

  • 32 GB kit gives your Supermicro X14SAE full rated capacity
  • DDR5-5600 CL46 runs at the board's native speed without manual tuning
  • 1 V 1Rx8 unbuffered UDIMM matches the controller's exact voltage and rank requirements
  • 288-pin non-ECC modules fit the desktop DIMM slots the motherboard provides
  • Major OEM Samsung, Micron or Hynix chips tested for stability at rated specifications

32 GB DDR5 kit for Supermicro X14SAE

This 32 GB kit contains four 8 GB DDR5 UDIMM modules rated at 5600 MT/s with CL46 timing at 1.1 V. It is built as a direct upgrade for the Supermicro X14SAE motherboard using the 288-pin unbuffered non-ECC layout that board requires.

Verified fitment and OEM components

Modules use major OEM chips from Samsung, Micron or Hynix and are tested at the rated speed, voltage and latency for stable operation. The 1Rx8 rank structure matches the memory controller expectations so the full capacity is recognised without manual configuration.

Lifetime support and pre-purchase check

The kit ships as a matched set of four modules with no heat spreaders included. Buyers who need ECC registered DIMMs or SODIMM form factors should select a different product. Consult the motherboard manual for approved population order before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $499.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB (4 × 8 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $15.62 per GB
Pricier than about 62% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-818K4
Total capacity32 GB (4 × 8 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 4 × 8 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will DDR5 5600 PC5-44800 run at its rated speed on the Supermicro X14SAE?

The kit is spec-matched to the board's DDR5 5600 controller, so the memory controller recognises the 1Rx8 rank, 1.10 V voltage and CL46 timing and runs the modules at the rated 5600 MT/s without manual tuning.

Does the 288-pin UDIMM form factor fit the Supermicro X14SAE DIMM slots?

Yes, the board requires 288-pin unbuffered UDIMMs and this kit uses exactly that form factor; no ECC or registered modules are needed, so the sticks seat directly in the standard desktop DIMM slots.

What is the correct population order for the four 8 GB modules on the X14SAE?

Consult the motherboard manual for the approved DIMM population sequence; the manufacturer highlights that supported capacities and slot order vary by model, so follow the board-specific guide to ensure all 32 GB are recognised.

More in Model-Specific Memory Upgrades

Similar items