We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, small rectangular SODIMM module

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz CL46 2Rx8 1.1V 262-PIN SODIMM memory upgrade

SKU CH-9NZH-ND7SZ

A 32 GB DDR5 SODIMM running at 5600 MHz with CL46 timing and 1.1 V for the Supermicro X14SAV-F motherboard

  • Total capacity32 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 32GB

  • 32GB capacity expands multitasking headroom for demanding workloads
  • DDR5 5600MHz speed delivers rated data rates for responsive performance
  • CL46 latency with 1.1V operation matches controller expectations for stable operation
  • 2Rx8 262-pin SODIMM form factor fits Supermicro X14SAV-F motherboard slots precisely
  • Major OEM chips from Samsung, Micron, Hynix tested for reliability at rated specifications

Exact-match 32GB DDR5-5600 SODIMM

This 32GB DDR5 5600MHz module uses a 262-pin SODIMM form factor with CL46 latency and 1.1V operation. It is built as a 2Rx8 Non-ECC unbuffered kit using major OEM chips from Samsung, Micron or Hynix. The specification matches the memory controller expectations for the Supermicro X14SAV-F motherboard.

Upgrade from lower-capacity or slower DDR5 SODIMMs

A jump to this 32GB module is worthwhile when the current configuration limits multitasking headroom or runs at a lower data rate than PC5-44800. The precise rank, voltage and timing ensure the system recognises the full capacity and operates at the rated speed without manual adjustment.

Suits Supermicro X14SAV-F owners adding 32GB

Builders who need a single verified 32GB DDR5 SODIMM for this specific motherboard will find the exact electrical and physical match here. Buyers who want ECC functionality, registered buffering, a different pin count, or a desktop UDIMM form factor should look at something else.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $380.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $11.91 per GB
Pricier than about 57% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered SODIMM Memory
Part numberMS44800-328K1
Total capacity32 GB
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 262-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 262-pin DDR5 SODIMM fit the Supermicro X14SAV-F motherboard?

Yes. The module is a 262-pin DDR5 SODIMM specified for the Supermicro X14SAV-F motherboard, matching the required form factor and DDR5 5600 (PC5-44800) speed.

What is the correct way to seat the 2Rx8 SODIMM so it is recognised at 32GB?

Insert the module at the proper angle into the SODIMM slot until the gold contacts are hidden, then press down firmly until both side clips click into the notches; verify in BIOS that the full 32GB appears at DDR5 5600.

Will the Samsung, Micron or Hynix chips on this module need any firmware updates or thermal pads later?

No firmware updates are required for the memory chips, and the module has no heat spreader, so no thermal pads are needed; it runs at the rated 1.1V and CL46 without further maintenance.

More in Model-Specific Memory Upgrades

Similar items