We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz PC5-44800 2Rx8 CL46 1.1V 288-Pin UDIMM Supermicro X13SAQ memory upgrade

SKU CH-VV07-69J0H

A 32 GB DDR5 UDIMM running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro X13SAQ motherboard

  • Total capacity32 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 32GB

  • Exact-match upgrade for Supermicro X13SAQ motherboard
  • 32 GB DDR5 5600 MHz CL46 runs at rated speed
  • 1 V 2Rx8 unbuffered UDIMM fits board requirements
  • Major OEM Samsung Micron Hynix chips tested for stability
  • 288-pin DDR5 form factor ensures physical compatibility

Exact-fit DDR5 upgrade for Supermicro X13SAQ

This 32 GB DDR5 5600 MHz UDIMM matches the Supermicro X13SAQ memory controller specifications. It runs at PC5-44800 with CL46 timing at 1.1 V using 2Rx8 unbuffered non-ECC chips. The 288-pin module is recognised at full capacity and rated speed without manual tuning.

Sustained-load behaviour

Major OEM Samsung Micron or Hynix ICs are tested for stability at the rated frequency voltage and latency. The unbuffered design feeds data directly to the controller keeping latency predictable during extended workloads. Absence of a heat spreader relies on case airflow to maintain temperature under continuous operation.

Replaces lower-capacity DDR5 DIMMs

Install this module when the board has an empty 288-pin slot or when replacing a smaller DDR5 stick to reach the platform maximum. The upgrade is worthwhile when applications need more than the current installed memory. It is not for systems that require ECC registered modules SODIMM form factor or a different DDR generation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $479.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $15.00 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-328K1
Total capacity32 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power does the 1.1 V DDR5 module draw when the system runs all day?

The module operates at 1.10 V, the standard DDR5 voltage, so power draw stays low during continuous operation.

What motherboard slot and memory type must I already have for this 288-pin UDIMM to work?

You need a board with a 288-pin DDR5 UDIMM slot that supports non-ECC unbuffered memory at 5600 MHz.

Will the 2Rx8 CL46 sticks work alongside other DDR5 modules I might keep?

Yes, if the other modules are also DDR5 non-ECC unbuffered UDIMMs; the board will run all sticks at the lowest common speed and timing.

More in Model-Specific Memory Upgrades

Similar items