We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 1.1V 2Rx8 288-Pin UDIMM for Supermicro X13SAW-TLN4F memory upgrade

SKU CH-QT2X-3PD2J

A 32GB DDR5 5600 UDIMM with CL46 timing and 1.1V operation, built for the Supermicro X13SAW-TLN4F motherboard

  • Total capacity32 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 32GB

  • Exact 32 GB DDR5-5600 module rated CL46 at 1.1 V for full-speed recognition
  • Verified fit for Supermicro X13SAW-TLN4F with 288-pin UDIMM form factor
  • Built from major OEM Samsung, Micron or Hynix chips tested at rated specs
  • 2Rx8 dual-rank Non-ECC unbuffered design matches board population rules
  • Lifetime replacement warranty with US-based technical support included

Precise DDR5 upgrade for Supermicro X13SAW-TLN4F

This 32GB DDR5 5600 UDIMM matches the exact rank, voltage, and timing the Supermicro X13SAW-TLN4F memory controller expects. It is a Non-ECC, Unbuffered module built with major OEM chips and tested for stability at rated specifications. The 288-pin form factor fits the desktop board's DIMM slots directly.

DDR5 5600 speed and CL46 latency define

The module runs at 5600 MT/s (PC5-44800) with a CAS latency of 46 at 1.1V. The memory controller must support this specific speed and timing combination for the kit to operate at its rated frequency. Population rules and maximum supported capacity per slot are determined by the motherboard firmware and must be verified before installation.

2Rx8 dual-rank organisation determines compatibility

The 2Rx8 configuration presents two ranks per module to the memory controller, which affects how the board populates channels and reaches total capacity. Systems requiring a single-rank (1Rx8) or quad-rank (4Rx8) module will not accept this part. Check the motherboard manual for approved rank configurations and DIMM population order.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $475.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $14.87 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-328K1
Total capacity32 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 32 GB kit or look for a different capacity for my Supermicro X13SAW-TLN4F?

This kit provides 32 GB in a single 2Rx8 UDIMM; check your motherboard manual for the maximum supported capacity per slot and the total number of slots available.

What does the 5600 MHz rating mean once the module is installed in my Supermicro X13SAW-TLN4F?

The module will run at DDR5 5600 with CL46 timings at 1.10 V, provided the board's memory controller supports that speed and the BIOS is configured accordingly.

How does the PC5-44800 designation relate to the 288-pin UDIMM interface on this board?

PC5-44800 is the industry name for DDR5 5600 on a 288-pin unbuffered DIMM; the motherboard's DDR5 slots accept this exact form factor and data rate.

More in Model-Specific Memory Upgrades

Similar items