We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 384GB (4x96GB) DDR5 5600 ECC RDIMM Supermicro H13SRH memory upgrade

SKU CH-V9BT-9RZWY

A 384 GB kit of four 96 GB DDR5 5600 ECC registered DIMMs built for the Supermicro H13SRH motherboard

  • Total capacity384 GB (4 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 384GB 4X96GB

Show 18 more

Speed 5600MHz

  • 384 GB total capacity from four 96 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency matching the H13SRH memory controller
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank keeps power draw within spec
  • 288-pin form factor verified for Supermicro H13SRH motherboard compatibility

Exact-match DDR5 RDIMM kit for Supermicro H13SRH

This NEMIX RAM kit delivers 384GB across four 96GB DDR5 5600 registered ECC modules. The 2Rx4 organisation, 1.1V operating voltage and CL46 timing match the memory controller requirements of the Supermicro H13SRH motherboard so the full capacity is recognised at rated speed.

Thermals noise and power draw

Registered buffering reduces electrical load on the memory controller when all slots are populated, while the 1.1V DDR5 baseline keeps power draw low. No heat spreader is fitted, so airflow across the bare PCBs handles cooling in standard server chassis. ECC corrects single-bit errors on the fly to prevent silent data corruption.

Upgrade scope and fitment check

The kit replaces any lower-capacity RDIMM set or fills empty slots to reach the board's maximum supported density. The jump is worth it when workloads need the full 384GB at DDR5 5600 without downclocking. Consult the motherboard manual for approved population order and supported capacities before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $11,591.99
Pricier than about 89% of the 21,161 comparable items (median $397.99).
Total capacity 384 GB (4 × 96 GB)
Higher than about 85% of the 20,941 comparable items (median 32 GB).
Price per GB $30.19 per GB
Pricier than about 86% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K4
Total capacity384 GB (4 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items384 GB 4 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 288-pin RDIMM modules in the Supermicro H13SRH, and which step is commonly missed?

Power down the server, open the chassis, and insert each 96GB module into the slots specified by the motherboard manual's population order, pressing until both latches click; the step often missed is confirming the exact slot sequence for four 2Rx4 RDIMMs before booting.

What maintenance or replacement will the 384GB DDR5 ECC RDIMM kit need over its service life?

No scheduled maintenance is required; the modules have no heat spreaders or moving parts, and ECC corrects single-bit errors automatically, so replacement only occurs if a module fails and is covered by the lifetime replacement warranty.

What is the first limit that appears when the 4x96GB kit runs at DDR5 5600 continuously under full load?

The registered buffer and 1.10V operation keep signal integrity stable at the rated CL46 timing, so the first practical limit is the motherboard's maximum supported capacity and population rules rather than the memory modules themselves.

More in Model-Specific Memory Upgrades

Similar items