We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with gold contacts no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 32GB (2x16GB) CL46 1.1V 1Rx8 Supermicro H13SRH memory upgrade

SKU CH-NPAT-5HPN1

32 GB DDR5-5600 ECC registered DIMM kit (2×16 GB, CL46, 1.1 V, 1Rx8) validated for Supermicro H13SRH servers

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 32GB 2X16GB

Show 18 more

Speed 5600MHz

  • 32 GB kit (2 × 16 GB) gives full capacity at rated speed
  • DDR5-5600 PC5-44800 CL46 1.1 V matches controller timing exactly
  • Registered ECC RDIMM offloads controller and corrects single-bit errors
  • 288-pin 1Rx8 form factor verified for Supermicro H13SRH motherboard
  • Lifetime replacement warranty with free US-based technical support

32GB DDR5-5600 ECC RDIMM kit for Supermicro H13SRH

This 32GB kit delivers two 16GB DDR5 Registered DIMMs rated at 5600MHz PC5-44800 with CL46 latency and 1.1V operation. It targets administrators upgrading the Supermicro H13SRH motherboard where registered ECC memory is required for full capacity recognition and stable operation.

Registered ECC build with 288-pin RDIMM form factor

Registered architecture buffers the address and command signals so every slot can run fully populated at rated speed, while on-die ECC corrects single-bit errors before they reach the OS. The 288-pin RDIMM form factor matches the H13SRH slots exactly; UDIMM or SODIMM modules will not fit or function. No heat spreader is present, so airflow across the modules follows the chassis design.

Verify population rules

Server memory support varies by model and BIOS revision. Consult the H13SRH manual for approved DIMM population order, maximum capacity per channel, and installation steps to ensure the kit is recognised at full 32GB capacity.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $893.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $27.94 per GB
Pricier than about 78% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 2 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the DDR5 5600 PC5-44800 standard cap the speed at 5600 MT/s?

Yes, the kit is rated DDR5 5600 (PC5-44800) and will run at that data rate when the motherboard supports it.

Will these 288-pin RDIMMs fit the Supermicro H13SRH motherboard slots?

The modules are 288-pin Registered RDIMMs, the exact form factor the H13SRH requires.

How do I install the 2x16GB kit and what step is often missed?

Power off, open the chassis, insert each RDIMM into the slots specified in the H13SRH manual following the prescribed population order, then lock the ejectors — skipping the population order is the common mistake.

More in Model-Specific Memory Upgrades

Similar items