NEMIX RAM 48GB (6x8GB) DDR4 3200MHz ECC RDIMM CL22 1.2V 288-Pin ThinkMate XS8-24S3

48GB DDR4 ECC RDIMM kit

This 48GB kit contains six 8GB DDR4 3200MHz ECC registered DIMMs built for ThinkMate XS8-24S3 workstations. Each module runs at 1.2V with CL22 latency and uses a 1Rx8 organisation. The registered design adds a buffer that stabilises heavy multi-module loads. System administrators upgrading memory in supported ThinkMate platforms will find the configuration matches the vendor-qualified specification.

Registered ECC with 1Rx8 organisation

The single specification that decides fit is the registered ECC RDIMM format combined with a 1Rx8 rank structure at DDR4 3200. Workstation motherboards that require registered modules with error correction will accept this kit; boards limited to unbuffered non-ECC UDIMMs will not. Mixing registered and unbuffered DIMMs prevents boot, so the existing memory type must match.

Thermals and power in normal use

Operating at 1.2V, the modules draw minimal power and run without heat spreaders, relying on chassis airflow for cooling. Registered DIMMs typically generate slightly more heat than unbuffered equivalents, but the low voltage keeps thermal output modest. No active cooling is required beyond standard server or workstation fan profiles.