We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 5600 CL46 2Rx8 1.1V UDIMM Supermicro X14SAZ-TLN4F memory upgrade

SKU CH-3MKG-0V46G

48 GB DDR5 5600 CL46 2Rx8 UDIMM built with major OEM chips and validated for the Supermicro X14SAZ-TLN4F motherboard

  • Total capacity48 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 48GB

  • 48 GB capacity for demanding workloads using a single 48GB module
  • DDR5 5600 speed transfers data at PC5-44800 bandwidth
  • CL46 CAS latency matches the memory controller timing for stable operation
  • 1 V low voltage reduces power draw and heat output
  • 2Rx8 dual-rank organisation maximises density on a 288-pin UDIMM

Exact DDR5-5600 upgrade for Supermicro X14SAZ-TLN4F

This 48GB NEMIX RAM module is a system-specific UDIMM built to match the Supermicro X14SAZ-TLN4F motherboard. It uses the 288-pin DDR5 form factor required by that board. The kit contains a single 48GB stick rated at PC5-44800 speed.

CL46 timing at 1.1V decides compatibility

The memory controller expects a CAS latency of 46 cycles at 1.10V with a 2Rx8 rank structure. These exact figures allow the module to be recognised at full capacity and run at its rated 5600MT/s data rate without manual tuning. Any deviation in timing, voltage or rank would prevent correct operation.

Major OEM chips sustain rated speed under load

Samsung, Micron or Hynix ICs are tested for stability at the specified 5600MT/s, CL46 and 1.1V during extended operation. The unbuffered design feeds data directly to the controller without added latency. Systems needing ECC registered modules or SODIMM form factors cannot use this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $611.99
Pricier than about 54% of the 21,161 comparable items (median $397.99).
Total capacity 48 GB
Higher than about 55% of the 20,941 comparable items (median 32 GB).
Price per GB $12.75 per GB
Pricier than about 59% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-4828K1
Total capacity48 GB
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will 5600 MT/s actually run at that speed in my Supermicro X14SAZ-TLN4F?

The module is spec-matched to the board's memory controller, so it initializes at DDR5 5600 (PC5-44800) with CL46 timing at 1.1 V without manual tuning.

Is the 288-pin DDR5 interface electrically compatible with the Supermicro X14SAZ-TLN4F slots?

Yes, the 288-pin UDIMM form factor matches the unbuffered non-ECC DDR5 slots on that motherboard; the 2Rx8 rank structure is what the board's population rules expect.

Does the 48 GB kit need a heat spreader or extra clearance in a standard desktop chassis?

No heat spreader is fitted, so the bare 288-pin PCB fits within normal DIMM keep-out zones and works with standard CPU coolers.

More in Model-Specific Memory Upgrades

Similar items