We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 48GB DDR5 5600MHz CL46 2Rx8 1.1V ECC Registered RDIMM GIGABYTE MZ33-CP1 memory upgrade

SKU CH-SSJT-E6FDJ

A 48 GB DDR5-5600 registered ECC RDIMM built to the exact rank, voltage and timing the GIGABYTE MZ33-CP1 expects

  • Total capacity48 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 48GB

Show 24 more
  • 48 GB capacity expands server memory headroom for demanding workloads
  • DDR5 5600 MT/s speed delivers rated throughput on compatible platforms
  • CL46 CAS latency matches the memory controller timing expectations
  • 1 V registered ECC design offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard slot requirement

Exact-match server upgrade

This 48GB DDR5 module runs at 5600MHz with CL46 latency and 1.1V operation. It is built as a 2Rx8 registered ECC RDIMM using Samsung, Micron or Hynix components. The specification matches the memory controller requirements of the GIGABYTE MZ33-CP1 motherboard so the system recognises the full capacity at rated speed.

Registered ECC architecture for full population

The registered design buffers address and command signals, reducing electrical load on the memory controller when every slot is filled. ECC circuitry detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. The 288-pin RDIMM form factor is the only type this board accepts.

No heat spreader or software included

The kit contains only the memory module itself without a heat spreader or any bundled utilities. System stability depends on following the motherboard manual for approved DIMM population order and maximum supported capacity per channel. Builders needing unbuffered UDIMM or SODIMM formats must select a different product.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,066.99
Pricier than about 61% of the 21,161 comparable items (median $397.99).
Total capacity 48 GB
Higher than about 55% of the 20,941 comparable items (median 32 GB).
Price per GB $22.23 per GB
Pricier than about 67% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K1
Total capacity48 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the CL46 latency and 1.10V voltage stay stable when the server runs continuously?

The module is rated at CL46 CAS latency and operates at the standard DDR5 voltage of 1.10V, which the memory controller manages under sustained load.

How much heat does the 2Rx8 registered ECC RDIMM produce during all-day operation?

This RDIMM has no heat spreader and runs at the standard 1.10V DDR5 voltage; registered buffering reduces electrical load on the memory controller during continuous use.

Does my GIGABYTE MZ33-CP1 motherboard need a specific BIOS version or CPU to recognise this 48GB DDR5 5600 RDIMM?

The module is an exact-match upgrade specified for the GIGABYTE MZ33-CP1 motherboard at DDR5 5600 (PC5-44800) with 2Rx8 registered ECC layout.

More in Model-Specific Memory Upgrades

Similar items