We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX XT-5315 memory upgrade

SKU CH-W69Q-2T5SN

4 GB DDR3 SODIMM running at 1333 MHz and 1.35 V for the POSIFLEX XT-5315 terminal

  • Total capacity4 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • Designed for POSIFLEX XT-5315 terminal compatibility
  • 4GB DDR3 1333MHz PC3-10600 capacity upgrade
  • Low-voltage 1.35V operation reduces power consumption
  • 204-pin SODIMM form factor fits POS systems
  • Tested with major OEM Samsung Micron Hynix chips

Targeted POS Terminal Upgrade

This 4GB DDR3 SODIMM is built for the POSIFLEX XT-5315 JIVA terminal and compatible point-of-sale systems. It delivers a direct memory increase for environments running retail, hospitality or kiosk workloads on legacy DDR3 platforms. The module suits IT teams maintaining existing fleets rather than builders specifying new hardware.

Standard SODIMM Build for Service Access

The 204-pin unbuffered stick uses major OEM chips from Samsung, Micron or Hynix and carries no heat spreader, keeping the profile thin for cramped service bays. Non-ECC operation matches the terminal's motherboard design, and the 2Rx8 organisation is the native configuration for this platform. Installation follows the usual SODIMM slot procedure without special tools.

Low-Voltage Operation in Fanless Chassis

Rated at 1.35V with a CL9 latency at 1333MHz, the module draws minimal power inside the passively cooled XT-5315 enclosure. The reduced voltage compared to standard 1.50V DDR3 limits heat output, helping the terminal stay silent during extended shifts. No active cooling is required on the memory itself.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $24.99
Cheaper than about 88% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $6.25 per GB
Cheaper than about 63% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-428K1
Total capacity4 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items4 GB (1 × 4 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the DDR3 1333 PC3-10600 interface limit this module to 1333 MT/s in a POSIFLEX XT-5315 terminal?

Yes, the module is rated DDR3 1333 (PC3-10600) and will run at that speed in the POSIFLEX XT-5315.

What physical slot and form factor are required to install this 204-pin SODIMM?

It fits a standard 204-pin DDR3 SODIMM slot; the terminal must accept 204-pin unbuffered SODIMMs.

What is the correct way to seat this 1.35 V SODIMM so the terminal recognises the full 4 GB?

Align the notch, insert at an angle, then press down firmly until both side clips click into the notches.

More in Model-Specific Memory Upgrades

Similar items