We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 2Rx8 1.35V 204-Pin SODIMM POSIFLEX PS-3515Q memory upgrade

SKU CH-02MG-R3A48

4GB DDR3 1333MHz SODIMM upgrades POSIFLEX PS-3515Q terminals with 1.35V low-voltage operation

  • Total capacity4 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • Designed for POSIFLEX PS-3515Q terminals
  • DDR3 1333 speed boosts transaction processing
  • Low 1.35V voltage reduces system heat
  • 2Rx8 dual-rank layout maximises 4GB capacity
  • 204-pin SODIMM fits kiosk motherboards directly

NEMIX RAM 4GB DDR3 POS Module

This NEMIX RAM 4GB DDR3 1333MHz PC3-10600 SODIMM is built for the POSIFLEX PS-3515Q fanless point-of-sale terminal. It runs at 1.35V low voltage with CL9 latency and a 2Rx8 rank configuration. The 204-pin unbuffered non-ECC module uses major OEM chips from Samsung, Micron or Hynix. It installs in minutes to boost terminal responsiveness.

Suits POSIFLEX PS-3515Q upgrades

This module fits the POSIFLEX PS-3515Q terminal when a single 4GB DDR3 SODIMM is required. Builders needing ECC error correction, registered buffering, higher capacity than 4GB, or a different voltage such as 1.50V should look at other parts. Systems using DDR5 or other form factors cannot accept this memory.

DDR3 1333MHz PC3-10600 speed decides fit

The memory operates at DDR3 1333MHz rated as PC3-10600 with CL9 timing. This exact speed grade must match the terminal's memory controller specification for stable operation. A different DDR3 speed or a DDR5 module will not work in the PS-3515Q. Verify the platform requires PC3-10600 before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $24.99
Cheaper than about 88% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $6.25 per GB
Cheaper than about 63% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-428K1
Total capacity4 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items4 GB (1 × 4 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Should I choose the 4GB module or look for a different capacity?

This listing is for a single 4GB stick (part MS10600-428K1). If your POSIFLEX PS-3515Q has one free SODIMM slot, this adds 4GB. If you need more total memory, you would need to buy additional modules of the same specification.

What does the 1333 MHz rating mean once the module is installed?

The module runs at DDR3 1333 (PC3-10600) with CL9 latency at 1.50 V. The POSIFLEX PS-3515Q memory controller will operate it at that speed; it will not run faster than 1333 MHz.

Does the 204-pin SODIMM interface limit the memory speed in practice?

The 204-pin DDR3 SODIMM form factor is keyed for DDR3 only. The module is rated for 1333 MHz and the system will run it at that speed.

More in Model-Specific Memory Upgrades

Similar items