We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 512GB 8x64GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-P58K-SGRK6

Eight 64 GB DDR5 registered ECC RDIMMs totalling 512 GB at 4800 MT/s CL40 1.10 V for the Supermicro H14DSG-OM motherboard

  • Total capacity512 GB (8 × 64 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 512 GB total capacity from eight matched 64 GB modules
  • DDR5-4800 speed with CL40 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches the server memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM board

Exact-match DDR5-4800 ECC RDIMM kit

This 512GB kit contains eight 64GB DDR5 4800 modules rated CL40 at 1.10V. Each stick is a 288-pin 2Rx4 Registered ECC RDIMM built with major OEM chips. The Registered architecture lets the Supermicro H14DSG-OM motherboard run all slots fully populated at rated speed while ECC corrects single-bit errors on the fly.

Verify board population rules first

Check the Supermicro H14DSG-OM manual for supported capacities per slot, approved DIMM population order, and any BIOS version requirements before ordering. The board requires 288-pin RDIMM modules — not UDIMM or SODIMM — and population rules change with CPU count and memory-channel layout. Confirm the eight-module configuration matches your processor installation and channel-filling sequence.

Replaces partial or mixed-capacity sets

The kit upgrades from smaller Registered ECC kits or mismatched modules that force the controller to downclock or limit capacity. Moving to a validated eight-module 512GB set restores full-channel bandwidth and eliminates rank-mismatch errors. The jump is worth it when your workload needs maximum registered capacity and you want a single part number qualified for this exact motherboard.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $12,656.99
Pricier than about 90% of the 21,161 comparable items (median $397.99).
Total capacity 512 GB (8 × 64 GB)
Higher than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $24.72 per GB
Pricier than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-924K8
Total capacity512 GB (8 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items512 GB 8 × 64 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What does the 512GB 8x64GB kit include and is anything else needed to install it in a Supermicro H14DSG-OM?

The kit contains eight 64GB DDR5 4800 CL40 2Rx4 1.1V 288-pin ECC Registered RDIMM modules. No extra parts are required; the modules plug directly into the motherboard's DDR5 RDIMM slots.

Why choose the 512GB 8x64GB DDR5 4800 CL40 2Rx4 ECC RDIMM kit over other capacities for the Supermicro H14DSG-OM?

This kit matches the board's DDR5 RDIMM requirement, registered architecture, 2Rx4 rank, 1.1V voltage and CL40 timing so all eight slots can be populated at the rated 4800 MT/s speed.

What does the DDR5 4800 (PC5-38400) rating mean once the modules are running in the server?

The modules operate at 4800 MT/s with CL40 latency at 1.1V, delivering the bandwidth and error-correcting stability the Supermicro H14DSG-OM memory controller expects when fully populated.

More in Model-Specific Memory Upgrades

Similar items