We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green rectangular SODIMM modules with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 64GB (2 x 32GB) DDR5 5600 ECC SODIMM memory upgrade

SKU CH-B6WS-48EGY

64 GB dual-channel DDR5 ECC SODIMM kit running at 5600 MHz with CL46 latency for Supermicro X14SAV-F systems

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 64GB 2X32GB

  • 64 GB total capacity from two 32 GB modules for maximum system memory
  • DDR5 5600 speed delivers PC5-44800 bandwidth for responsive performance
  • ECC technology detects and corrects single-bit errors to protect data integrity
  • 262-pin unbuffered SODIMM form factor matches Supermicro X14SAV-F motherboard requirements
  • CL46 latency at 1.1 V provides efficient operation within spec

Exact-match DDR5 ECC SODIMM kit

This 64GB kit delivers two 32GB DDR5-5600 modules built to the PC5-44800 standard. Each 262-pin SODIMM runs at 1.10V with CL46 latency and 2Rx8 organisation. Unbuffered ECC operation meets the Supermicro X14SAV-F memory controller requirements for full-capacity recognition at rated speed.

Sustained-load stability

Error-correcting code detects and corrects single-bit errors on the fly during continuous operation. The 1.10V operating voltage and unbuffered design maintain consistent timing without registered delays. Samsung, Micron or Hynix major-OEM chips provide the signal integrity needed for long compute sessions without silent data corruption or unplanned reboots.

262-pin SODIMM form factor

This kit fits only systems that accept DDR5 262-pin unbuffered ECC SODIMMs. It will not install in full-size UDIMM or RDIMM slots. Builders needing a different pin count, voltage, or registered buffering must choose another product.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,168.99
Pricier than about 62% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $18.27 per GB
Pricier than about 64% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 ECC Unbuffered SODIMM Memory
Part numberMSE44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type262-Pin DDR5 ECC SODIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 2 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 262-PIN ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much heat and power does this 1.1V DDR5 5600 kit draw when the Supermicro X14SAV-F runs continuously?

The modules operate at 1.10V with no heat spreader, so power draw stays low and thermals depend on chassis airflow rather than the memory itself.

What motherboard slot and memory controller features must my system provide for these 262-pin ECC SODIMMs to function?

A DDR5 SODIMM slot supporting unbuffered ECC at 5600 MT/s, 1.10V, CL46 timing and 2Rx8 rank organisation is required.

Will this 64GB kit work alongside any existing DDR5 ECC SODIMMs already installed in the Supermicro X14SAV-F?

Yes, provided the other modules match the same 5600 MT/s speed, 1.10V voltage, CL46 latency, unbuffered ECC type and 2Rx8 rank configuration.

More in Model-Specific Memory Upgrades

Similar items