We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 4800 CL40 2Rx8 ECC Registered RDIMM for GIGABYTE MZ33-AR1 memory upgrade

SKU CH-BBDC-NXPS2

A 64 GB DDR5 registered ECC kit with two 32 GB modules at 4800 MHz, CL40, 1.1 V for the GIGABYTE MZ33-AR1 motherboard

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 64 GB total capacity from two 32 GB modules for maximum server density
  • DDR5 4800 CL40 speed with 1.10 V operation matching board specifications
  • Registered ECC RDIMM design corrects single-bit errors and offloads the memory controller
  • 2Rx8 dual-rank organisation enables full-capacity population on the GIGABYTE MZ33-AR1
  • 288-pin DDR5 form factor ensures exact physical and electrical compatibility

Exact-match 64GB DDR5 kit for GIGABYTE MZ33-AR1

This 64GB kit contains two 32GB DDR5-4800 Registered ECC RDIMMs built to the precise rank, voltage and timing the GIGABYTE MZ33-AR1 memory controller expects. The modules are 2Rx8, run at 1.1V with CL40 latency and use the 288-pin RDIMM form factor required by this server board.

Install by following the board manual population

The motherboard manual defines the supported capacities, approved DIMM population order and installation steps; consult it before fitting the modules. Registered RDIMMs must be seated fully in the correct slots so the memory controller recognises the full 64GB at rated speed.

DDR5-4800 bandwidth limits total throughput

The DDR5-4800 (PC5-38400) interface caps peak data rate at the rated speed, so sustained throughput cannot exceed this ceiling. Registered buffering and ECC add minor latency overhead while protecting data integrity, and the 1.1V operating voltage is fixed by the DDR5 standard for this speed grade.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,940.99
Pricier than about 68% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $30.33 per GB
Pricier than about 87% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items64 GB 2 × 32 GB DDR5 4800 MHz PC5-38400 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How can I confirm the NEMIX RAM 64GB kit is running at DDR5 4800 CL40 after installation?

Check the BIOS memory information or a tool like CPU-Z to verify the modules report 4800 MT/s, CL40 timings, 1.10 V, and registered ECC operation on the GIGABYTE MZ33-AR1.

What is included in the package and what must be purchased separately?

The box contains the 64 GB kit as two 32 GB 288-pin DDR5 RDIMMs; no heat spreaders, cables, or additional hardware are included.

Which capacity or version of this memory should I choose for the GIGABYTE MZ33-AR1?

This 64 GB (2 x 32 GB) 2Rx8 registered ECC kit matches the board's DDR5 4800 PC5-38400 specification; select it when your configuration calls for a two-DIMM populated channel at full rated speed.

More in Model-Specific Memory Upgrades

Similar items