We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 96GB 2x48GB DDR5 4800 CL40 1.1V ECC RDIMM MZ73-LM2

SKU CH-6WYX-EPVPT

A 96GB DDR5 ECC registered server memory kit with two 48GB modules running at 4800MHz CL40 and 1.1V for GIGABYTE MZ73-LM2 motherboards

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB 2X48GB

Show 18 more
  • 96 GB kit lets you fully populate the GIGABYTE MZ73-LM2 with matched DDR5 modules
  • Registered ECC RDIMM design offloads the memory controller and corrects single-bit errors for server-grade stability
  • CL40 at 1.1 V delivers DDR5-4800 rated speed with low power draw per module
  • 2Rx8 organisation on 288-pin RDIMM form factor matches the motherboard's population rules exactly
  • Lifetime replacement warranty and free US-based technical support protect the investment long-term

96GB DDR5 ECC RDIMM Kit for Gigabyte MZ73-LM2

This 96GB kit contains two 48GB DDR5 4800 RDIMM modules built for the Gigabyte MZ73-LM2 motherboard. Registered ECC design with 2Rx8 organisation and CL40 latency matches the board's memory controller requirements. Intended for servers and workstations that need registered memory with error correction.

Registered Design with 288-Pin RDIMM Form Factor

The 288-pin registered RDIMM format offloads the memory controller so all slots can run fully populated at rated speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. No heat spreader is fitted, so airflow across the modules must be provided by the chassis.

Replaces Lower-Capacity or Unbuffered Modules

This kit upgrades systems currently limited to smaller registered kits or non-ECC memory that cannot meet data-integrity requirements. The jump is worth it when workloads demand full 96GB capacity with registered buffering and ECC protection. Not for platforms that require UDIMM, SODIMM or non-ECC memory.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,134.99
Pricier than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $22.24 per GB
Pricier than about 67% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items96 GB 2 × 48 GB DDR5 4800 MHz PC5-38400 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What DDR5 speed and PC5 rating does this 288-pin RDIMM kit run at?

The kit operates at DDR5 4800 with a PC5-38400 rating, matching the GIGABYTE MZ73-LM2 motherboard specification.

Does this ECC RDIMM kit need a 288-pin registered DIMM slot, and how many slots does it fill?

Yes, it uses 288-pin RDIMM slots and the kit occupies two slots with its 2x48GB modules.

What voltage and CAS latency are set on these modules, and do I need to enable anything in BIOS?

The modules run at 1.1V with CL40 timings; the board should detect them automatically, but verify the population order in the motherboard manual before installing.

More in Model-Specific Memory Upgrades

Similar items