We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 2Rx8 1.1V UDIMM Supermicro X13SAQ memory upgrade

SKU CH-0T2Y-60PZ3

A 64 GB DDR5 kit of two 32 GB UDIMMs running at 5600 MT/s with CL46 latency, 1.1 V operation and 2Rx8 rank, verified for the Supermicro X13SAQ motherboard

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 64GB 2X32GB

  • 64 GB kit lets your Supermicro X13SAQ run at full DDR5-5600 speed
  • CL46 timing and 1.10 V match the board's memory controller for stable operation
  • 2Rx8 dual-rank organisation maximises bandwidth across the two 32 GB modules
  • 288-pin UDIMM form factor fits the X13SAQ slots without adapters or ECC modules
  • Major OEM Samsung, Micron or Hynix chips tested at rated specifications for reliability

Exact-match upgrade for Supermicro X13SAQ

This 64GB kit delivers two 32GB DDR5 5600 CL46 2Rx8 UDIMMs at 1.1V. It is built for the Supermicro X13SAQ motherboard and matches the board's memory-controller requirements for rank, voltage and timing so the full capacity is recognised at rated speed.

288-pin unbuffered form factor

Modules use the standard 288-pin UDIMM layout required by the X13SAQ, not ECC or SODIMM variants. Major OEM chips from Samsung, Micron or Hynix are tested for stability at the specified speed and latency. No heat spreader is fitted, keeping the profile low for tight DIMM spacing.

Replaces smaller or slower DDR5 kits

The jump is worth it when your workload needs more than 32GB total capacity or when the current memory runs below 5600 MT/s. Buyers who need ECC error correction, registered modules or a different pin count should look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,000.99
Pricier than about 61% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $15.64 per GB
Pricier than about 62% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 2 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What speed does the DDR5 5600 PC5-44800 interface actually run at on the Supermicro X13SAQ?

The kit is rated for DDR5 5600 (PC5-44800) and will operate at that speed when the motherboard memory controller accepts the 2Rx8 1.1 V CL46 modules without down-clocking.

What physical slot and clearance does the 288-pin UDIMM kit need on the X13SAQ?

Each 32 GB module uses the standard 288-pin DDR5 UDIMM form factor with no heat spreader, so it fits any unbuffered DIMM slot on the board provided adjacent components do not block the module height.

Which DIMM slots should I populate first on the Supermicro X13SAQ for this 2x32 GB kit?

Install the two modules in the primary channel pair indicated in the motherboard manual — typically slots 1 and 3 or 2 and 4 — so the board recognises the full 64 GB at the rated 5600 MT/s timing.

More in Model-Specific Memory Upgrades

Similar items