We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two bare green DDR5 UDIMM sticks, no heat spreaders, 288-pin gold contacts visible

NEMIX RAM

NEMIX RAM MD44800-328K2 64GB (2×32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM Supermicro X13SAW-F

SKU CH-TC18-A2D2J

A 64GB dual-channel DDR5 kit (2×32GB) running at 5600MHz CL46 1.1V, validated for the Supermicro X13SAW-F motherboard

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 64GB 2X32GB

  • 64 GB capacity from two 32 GB modules for high-density desktop workloads
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth at 1.1 V
  • 2Rx8 dual-rank organisation matches the memory controller expectations of the Supermicro X13SAW-F
  • 288-pin UDIMM form factor fits the board's unbuffered non-ECC slots exactly
  • Built with Samsung, Micron or Hynix OEM chips and tested for stability at rated specifications

Exact-match kit for Supermicro X13SAW-F

This 64 GB kit contains two 32 GB DDR5 UDIMMs rated at 5600 MT/s with CL46 latency and 1.1 V operation. The modules are built with major OEM DRAM chips and use the 288-pin unbuffered non-ECC form factor the motherboard requires. No heat spreaders are included.

Verified fitment removes guesswork

The kit is tested for stability at the rated speed, timing and voltage, so the memory controller recognises the full capacity immediately. Rank configuration (2Rx8) matches the board's population rules, avoiding the partial-recognition issues that mismatched modules can cause.

Suits builders upgrading a Supermicro X13SAW-F

Buyers needing ECC error correction, registered DIMMs, SODIMM form factor or speeds beyond DDR5-5600 should look elsewhere. The kit also does not address systems limited to lower total capacities or different pin counts.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $966.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $15.11 per GB
Pricier than about 61% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 2 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the DDR5 5600 modules need a heat spreader added later?

The kit ships without a heat spreader; DDR5 5600 at 1.1 V runs within JEDEC thermal limits, so no aftermarket cooling is required for normal desktop workloads.

What limit appears first when the 64 GB kit runs at 5600 MT/s all day?

The memory controller on the Supermicro X13SAW-F caps the DDR5 5600 UDIMM slots at the rated 5600 MT/s, so sustained throughput tops out at the module's 44800 MB/s spec.

How much power and heat does the 2×32 GB kit produce at 1.1 V under continuous load?

Each 32 GB DDR5 UDIMM draws roughly 4–5 W at 1.1 V, so the pair adds about 8–10 W of heat — well within standard desktop airflow.

More in Model-Specific Memory Upgrades

Similar items