We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black memory chips, no heat spreader, SODIMM form factor

NEMIX RAM

NEMIX RAM 64GB 2x32GB DDR5 5600 PC5-44800 CL46 2Rx8 1.1V 262-pin SODIMM memory upgrade for Supermicro X14SPN-H

SKU CH-MH3C-TWWWW

A 64 GB DDR5 SODIMM kit with two 32 GB modules running at 5600 MHz, CL46, 1.1 V, validated for the Supermicro X14SPN-H

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 64GB 2X32GB

  • Exact-match 64GB DDR5 kit runs at rated 5600 speed
  • 2Rx8 CL46 1.1V timing matches controller expectations
  • Verified fit for Supermicro X14SPN-H SODIMM slot
  • Major OEM chips tested for stability at spec
  • Lifetime replacement warranty with US technical support

Exact-Match Upgrade for Supermicro X14SPN-H

This 64GB kit contains two 32GB DDR5 SODIMM modules rated at 5600 speed with CL46 timing. The 2Rx8 rank structure and 1.1V voltage match the memory controller requirements of the Supermicro X14SPN-H motherboard. It is built for systems that require 262-pin unbuffered non-ECC memory in a laptop form factor.

Verified Fitment Replaces Slower or Smaller Modules

The kit replaces existing DDR5 SODIMMs that run at lower speeds or offer less capacity, provided the system supports the 2Rx8 organisation. The upgrade is worth it when the board can address the full 64GB across two slots and the BIOS recognises the specified timing without manual adjustment. Buyers who need ECC or registered memory cannot use this product.

Simple Slot Installation With Population Rules

Installation follows standard SODIMM insertion into the 262-pin slots, but the motherboard manual must be consulted for the approved population order. The most common issue occurs when the system rejects the kit because the BIOS does not support the 2Rx8 density or the total 64GB capacity. No heat spreader is fitted, so clearance is not a concern.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $694.99
Pricier than about 56% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $10.86 per GB
Pricier than about 55% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered SODIMM Memory
Part numberMS44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 2 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 262-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 262-pin SODIMM modules fit the memory slots on the Supermicro X14SPN-H motherboard?

Yes, the kit uses the 262-pin DDR5 SODIMM form factor required by the Supermicro X14SPN-H motherboard, not a desktop UDIMM.

What is the correct order to install the two 32GB modules to match the board's population rules?

Consult the Supermicro X14SPN-H system manual for the approved population order before inserting the modules into the SODIMM slots.

Will the 2Rx8 rank configuration and 1.1V voltage require any future firmware updates to stay compatible?

The modules use major OEM chips tested for stability at the rated 1.1V and CL46 timing, and the kit is backed by lifetime replacement support.

More in Model-Specific Memory Upgrades

Similar items