We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600MHz CL46 2Rx8 1.1V 288-pin UDIMM memory upgrade for Supermicro X14SAZ-TLN4F

SKU CH-R9BE-CXGVN

64GB dual-channel DDR5 kit with two 32GB UDIMMs running at 5600MHz CL46 1.1V for Supermicro X14SAZ-TLN4F

  • Total capacity64 GB (2 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 64GB 2X32GB

  • 64 GB capacity from two 32 GB modules enables larger workloads
  • DDR5 5600 speed rated at PC5-44800 for faster data throughput
  • CL46 latency at 1.1 V matches the board's timing and voltage expectations
  • 2Rx8 dual-rank organisation uses major OEM Samsung, Micron or Hynix chips for tested stability
  • 288-pin UDIMM form factor fits the Supermicro X14SAZ-TLN4F motherboard exactly

Exact-match DDR5 kit for Supermicro X14SAZ-TLN4F

This 64GB kit contains two 32GB UDIMM modules rated at 5600MHz with CL46 latency and 1.10V operation. It uses 2Rx8 non-ECC unbuffered chips from major OEM suppliers and fits the 288-pin DDR5 slots on the specified motherboard. The modules are tested for stability at the rated speed and timing. No heat spreaders are included.

Replaces slower or smaller DDR5 memory on the same

The jump is worth it when your current modules run below 5600MHz or total capacity is under 64GB. Matching the board's exact rank, voltage, and timing requirements ensures full recognition and rated performance. Installing mismatched ranks or voltages can prevent boot or force lower speeds.

Sustained-load behaviour without heat spreaders

Under continuous workloads the bare chips rely on case airflow to stay within thermal limits. The 1.10V operating voltage helps moderate heat output during long sessions. Systems with restricted airflow may see throttling if ambient temperatures rise. Adequate chassis ventilation is required for consistent throughput.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,014.99
Pricier than about 61% of the 21,161 comparable items (median $397.99).
Total capacity 64 GB (2 × 32 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $15.86 per GB
Pricier than about 62% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-328K2
Total capacity64 GB (2 × 32 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items64 GB 2 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 288-pin DDR5 UDIMM modules fit the Supermicro X14SAZ-TLN4F motherboard slots?

Yes, the kit uses the standard 288-pin DDR5 UDIMM form factor that the X14SAZ-TLN4F requires; each module is a 32 GB 2Rx8 Non-ECC stick designed for the board's desktop memory slots.

What BIOS setting should I check after installing the 5600 MHz CL46 kit so it runs at the rated speed?

Enable the XMP or EXPO profile in the BIOS so the memory controller applies the 5600 MHz data rate, CL46 timings and 1.10 V automatically instead of falling back to a lower JEDEC speed.

Do these modules have a heat spreader that could need cleaning or replacement later?

No heat spreader is fitted; the bare DRAM chips rely on case airflow, so only occasional dust removal with compressed air is needed and no spreader maintenance is required.

More in Model-Specific Memory Upgrades

Similar items