NEMIX RAM 64GB (4x16GB) DDR4 3200 PC4-25600 CL22 2Rx8 1.2V 288-Pin ECC RDIMM for THINKMATE VSX-R5-540W3

System-Specific ECC RDIMM Kit

This 64GB kit contains four 16GB DDR4 3200 registered ECC modules built for the THINKMATE VSX-R5-540W3 workstation. Each stick runs at 1.2V with CL22 latency and a 2Rx8 organisation. The registered design adds a buffer that stabilises heavy multi-module loads in server-class motherboards.

Matched Quad-Channel Kit

The four modules are tested together as a single kit so the workstation can populate all four channels with identical timing and voltage. ECC circuitry corrects single-bit errors on the fly, protecting data integrity in long-running compute or storage workloads. No heat spreaders are fitted, leaving the DRAM exposed for standard server airflow paths.

Straightforward DIMM Installation

The 288-pin RDIMMs key into the workstation's DDR4 slots in the order shown in the system manual; no extra cables or firmware steps are required. Builders must verify the board accepts registered ECC memory, as unbuffered or non-ECC DIMMs will not work in this platform. Mixing these sticks with modules of different rank, speed or voltage typically prevents the system from posting.