We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board SODIMM with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX PS-3515 memory upgrade

SKU CH-H0XQ-NEVP0

8GB DDR3 SODIMM running at 1333MHz with 1.35V low voltage for POSIFLEX PS-3515 terminals

  • Total capacity8 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL9
  • Buffer typeUnbuffered
  • Rated voltage1.5 V
  • 8GB DDR3 1333 boosts POS terminal speed
  • 35V low-voltage design reduces power draw
  • 204-pin SODIMM fits Posiflex PS-3515 directly
  • CL9 latency supports responsive transaction processing
  • 2Rx8 organisation delivers stable enterprise operation

POSIFLEX PS-3515 memory upgrade

This 8 GB DDR3 SODIMM is built for the POSIFLEX PS-3515 point-of-sale terminal. It runs at 1333 MHz with CL9 latency and 1.35 V operation. The 204-pin unbuffered module uses 2Rx8 Samsung, Micron or Hynix chips.

Retail and kiosk operators needing a direct

Shops that run the PS-3515 fanless terminal can install this single stick without configuration changes. Systems that require ECC, registered DIMMs or a different pin count cannot use this module.

Sustained workload behaviour

The module is stress-tested under load to verify stability during long trading hours. Unbuffered DDR3 at 1.35 V keeps power draw low inside the fanless chassis. No heat spreader is fitted, so airflow in the terminal handles thermal dissipation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $16.99
Cheaper than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $2.12 per GB
Cheaper than about 93% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product linePOSIFLEX POS Series Point of Sale Kiosk Memory
Model namePOSIFLEX POS DDR3 1333 MHz Non-ECC Unbuffered SODIMM
Part numberMS10600-828K1
Total capacity8 GB
Product type204-Pin DDR3 SODIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL9
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Memory rank2Rx8
Power
Rated voltage1.5 V
Compatibility
Compatible systemsPOSIFLEX POS
In the box
Included items8 GB (1 × 8 GB) DDR3 1333 MHz PC3-10600 2Rx8 1.35 V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

What POS terminal must I already own for this SODIMM to be compatible?

This module is validated for the POSIFLEX PS-3515 fanless point-of-sale terminal and is designed to fit its 204-pin DDR3 SODIMM slot.

Will this DDR3-1333 module run correctly if my PS-3515 currently uses slower DDR3 memory?

The memory operates at 1333 MHz with CL9 latency at 1.35 V; the system will automatically clock it down to match any slower installed modules.

How can I confirm the upgrade is recognised after installation?

Power on the terminal and check the BIOS or operating-system memory information — it should show an 8 GB DDR3-1333 module at 1.35 V.

More in Model-Specific Memory Upgrades

Similar items