Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR5 4800 UDIMM module with CL40 latency and 1.1V operation for Thinkmate VSX-R5-340V12 workstations
This NEMIX RAM module delivers 8 GB of DDR5 memory at 4800 MT/s with CL40 latency and 1.1 V operation. The 288-pin UDIMM is built with major OEM chips and tested for the Thinkmate VSX-R5-340V12 workstation. It is a non-ECC, unbuffered single-rank stick designed for straightforward installation.
The module upgrades systems originally equipped with lower-capacity or slower DDR5 DIMMs. The jump is worthwhile when the workstation handles larger datasets, virtual machines or multi-threaded workloads that exceed the original memory ceiling. No heat spreader is fitted, so clearance inside dense chassis remains unchanged.
Buyers who need guaranteed compatibility with the specified Thinkmate model will find this part validated for that platform. Builders requiring ECC error correction, registered buffering, higher frequencies or larger single-module capacities should look elsewhere. The single 8 GB stick also limits total capacity on boards with few slots.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | NEMIX RAM |
| Product line | THINKMATE Server/Workstation Compatible Series Memory |
| Model name | THINKMATE DDR5 4800 MHz Non-ECC Unbuffered UDIMM |
| Part number | MD38400-818K1 |
| Total capacity | 8 GB |
| Product type | 288-Pin DDR5 UDIMM |
| Performance | |
| Rated speed | DDR5 4800 (PC5 38400) |
| Processor | |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Memory | |
| CAS latency | CL40 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Memory rank | 1Rx8 |
| Power | |
| Rated voltage | 1.1 V |
| Compatibility | |
| Compatible systems | THINKMATE |
| In the box | |
| Included items | 8 GB (1 × 8 GB) DDR5 4800 MHz PC5-38400 1Rx8 1.1 V CL40 288-PIN Non-ECC Unbuffered UDIMM |
Yes, the module uses the standard 288‑pin DDR5 UDIMM form factor that the VSX‑R5‑340V12 expects, so it seats directly into the board’s DIMM slots.
Align the notch with the slot key, press firmly until both side latches click, then verify in BIOS that the 4800 MT/s speed and CL40 latency are detected.
No firmware is required; the module runs at 1.10 V with major‑OEM DRAM chips and is covered by a lifetime replacement warranty if a fault ever appears.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?