We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR5 5600MHz CL46 1.1V 262-PIN SODIMM memory upgrade

SKU CH-PETW-WB80H

An 8 GB DDR5 SODIMM running at 5600 MHz with CL46 latency and 1.1 V for Supermicro X14SPN-H systems

  • Total capacity8 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 8GB

  • 8GB capacity lifts multitasking headroom for demanding workloads
  • DDR5 5600MHz speed delivers high data throughput for responsive performance
  • CL46 latency and 1.1V operation match the memory controller's exact timing and power requirements
  • 262-pin SODIMM form factor fits the Supermicro X14SPN-H motherboard slot precisely
  • Built with major OEM chips from Samsung, Micron or Hynix and tested for stability at rated specifications

Exact DDR5 SODIMM upgrade

This 8 GB DDR5-5600 module uses the 262-pin SODIMM form factor and runs at 1.1 V with CL46 timing. It is built with major OEM chips and tested for stability at the rated speed. The unbuffered, non-ECC design matches the memory controller requirements of compatible Supermicro systems.

Fits Supermicro X14SPN-H motherboard

The module installs directly into the board's SODIMM slots without adapters or voltage changes. Its 1Rx8 rank organisation follows the platform's population rules so the full capacity is recognised at the rated 5600 MT/s. No heat spreader is fitted, leaving clearance for tight laptop or compact chassis layouts.

Replaces slower or smaller DDR5 SODIMMs

Upgrading from lower-frequency DDR5 or lower-capacity modules restores the bandwidth the platform was designed for. The jump is worth it when the current memory limits multitasking throughput or forces the system to run below the native 5600 MT/s data rate. Buyers needing ECC, registered DIMMs or desktop UDIMM form factors should look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $85.99
Cheaper than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $10.75 per GB
Pricier than about 55% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered SODIMM Memory
Part numberMS44800-818K1
Total capacity8 GB
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items8 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 262-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power does the 1.1V DDR5 SODIMM draw under sustained load?

The module runs at 1.10V; DDR5 moves voltage regulation onto the stick, so sustained draw stays at the rated 1.10V level set by the memory controller.

Does the CL46 5600MHz stick run hot or loud during all-day operation?

No heat spreader is fitted and the module is unbuffered, so it relies on chassis airflow; it produces no noise and typical DDR5 SODIMM temperatures under load.

What must my Supermicro X14SPN-H already have to accept this 262-pin upgrade?

An available DDR5 SODIMM slot that supports 1Rx8 Non-ECC unbuffered modules at 5600MHz and 1.10V, per the board's memory-population rules.

More in Model-Specific Memory Upgrades

Similar items