We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 96GB (6x16GB) DDR5 5600MHz CL46 ECC RDIMM 1Rx8 1.1V 288-Pin Kit for GIGABYTE MZ73-LM2

SKU CH-1VMR-73WW2

A 96 GB registered ECC DDR5 kit with six 16 GB modules at 5600 MHz CL46, validated for the GIGABYTE MZ73-LM2 motherboard

  • Total capacity96 GB (6 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 96 GB total capacity from six 16 GB modules for maximum server density
  • DDR5 5600 speed rated at CL46 latency for responsive data throughput
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operating voltage matches platform spec for stable full-population operation
  • 288-pin RDIMM form factor verified for GIGABYTE MZ73-LM2 motherboard compatibility

System-Specific 96GB DDR5 RDIMM Kit

This 96GB kit contains six 16GB DDR5-5600 registered ECC modules built to the exact electrical and mechanical specification of the GIGABYTE MZ73-LM2 motherboard. The 288-pin RDIMM form factor, 1.1V operating voltage and CL46 latency match the board's qualified-vendor list so the memory controller recognises every module at full rated speed without manual tuning.

Suited For Verified Server Upgrades

Administrators expanding a GIGABYTE MZ73-LM2 platform to its maximum supported population will find the rank, voltage and timing pre-validated, eliminating trial-and-error qualification. Builders using consumer UDIMM slots, non-ECC workflows or motherboards that require different population rules should select memory matched to those specific platforms instead.

Registered ECC Architecture Decides Fit

The registered buffer offloads the memory controller so all six slots run fully populated at DDR5-5600 while on-die ECC corrects single-bit errors before they reach the OS. If your target system requires unbuffered UDIMMs, lacks ECC support in the BIOS or cannot accept 1Rx8 registered modules, this kit will not function.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,968.99
Pricier than about 73% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (6 × 16 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $30.93 per GB
Pricier than about 89% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K6
Total capacity96 GB (6 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items96 GB 6 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 96GB kit ship as six 16GB modules or do I need to buy anything else?

The package contains six 16GB DDR5 5600MHz CL46 ECC Registered RDIMMs, totalling 96GB; no additional parts are required for installation.

How do I decide between this 96GB kit and a smaller capacity for the GIGABYTE MZ73-LM2?

Choose the 96GB kit when your workload needs the full capacity across all six slots; smaller kits leave slots empty and reduce total memory available to the server.

What does the 5600MHz rating mean once the modules are installed in the MZ73-LM2?

The memory controller will run the kit at DDR5 5600 (PC5-44800) with CL46 latency at 1.1V, delivering the rated bandwidth when all six slots are populated.

More in Model-Specific Memory Upgrades

Similar items