We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 1.1V 2Rx4 ECC RDIMM memory upgrade

SKU CH-ZHSF-3F658

96GB DDR5 5600 ECC registered RDIMM with CL46 timing and 1.1V operation, validated for Supermicro X14SRA-T servers

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 4 more
  • 96 GB capacity fits large server workloads
  • DDR5 5600 speed matches Supermicro X14SRA-T specs
  • CL46 latency with 1.10 V voltage meets controller expectations
  • 2Rx4 registered ECC design prevents silent data errors
  • 288-pin RDIMM form factor installs in approved slots

Exact-match DDR5 RDIMM upgrade

This 96GB DDR5 5600 module is built for servers that require registered ECC memory with a 2Rx4 rank structure. It fits the 288-pin RDIMM slots on the Supermicro X14SRA-T motherboard and operates at the standard 1.1V DDR5 voltage.

Sustained-load stability

Registered buffering reduces the electrical load on the memory controller so every slot can run fully populated at the rated 5600 MT/s without down-clocking. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during continuous workloads.

Rank and voltage gate

The 2Rx4 organization and 1.1V operating point are the decisive specifications; boards that expect a different rank count or voltage will not recognise the module at full capacity. Verify your platform's qualified-vendor list before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,916.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $30.39 per GB
Pricier than about 87% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 1.1V DDR5 5600 RDIMM generate noticeable heat or fan noise when all slots are populated on a Supermicro X14SRA-T?

The module runs at the standard 1.1V DDR5 voltage with no heat spreader, so thermal output depends on chassis airflow and the motherboard's fan curves rather than the DIMM itself. Registered buffering keeps electrical load low even with every slot filled.

What must the motherboard provide for this 288-pin 2Rx4 ECC RDIMM to operate?

The board needs DDR5 RDIMM slots, a memory controller that accepts registered ECC modules, and BIOS support for 96GB 2Rx4 DIMMs at 5600 MT/s with CL46 timings. The Supermicro X14SRA-T meets those requirements.

Can this 5600 MT/s CL46 kit run alongside older DDR5 modules at a lower common speed in the same server?

Yes, the memory controller will negotiate the highest speed all installed DIMMs share. Mixing ranks or timings is supported but the system will run at the slowest module's rated frequency and loosest latency.

More in Model-Specific Memory Upgrades

Similar items